Thanks:
0
Likes:
0
Dislikes:
0
-
Senior Tech
100+ Posts
- Rep Power
- 27
Locks out printing
I was wondering if anybody has a solution to when a Maintenance message appears that printing is inhibited. We have some customers that have to have SNMP turned on for there application. Normally we just uncheck that in the driver and it works. I have tried the SIM26-38 and that doesn't help. Any help would be appreciated.
-
Trusted Tech
50+ Posts
- Rep Power
- 20
Re: Locks out printing
I would try sim code 55-3 change switch 9 Bit 5 to a 1
and 55-3 soft switch 22 bit 6 to a 1
These stop the displaying of maintenance
I am not sure what model you have if this will work or not.
-
Senior Tech
100+ Posts
- Rep Power
- 27
Re: Locks out printing
We have been setting those for quite sometime. The machines we are haveing issues with are the 3640,4141,364 among others
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks