Sharp MX 2700N Installation instructions for MX270HK

[rightbrained]

Greetings,
I again find myself in a conundrum.

My Sharp MX 2700N is in need of new heater fuser rollers.

The last time I was in this situation, I purchased the MX 270HK rebuild kit for a reasonable $140. However, I had a terrible time trying to rebuild the fuser unit without step by step instructions. I could not get the new rollers placed correctly and ultimately, the "fingers" tore right through the new rollers. In the end, I ended up spending an additional $290 to by a complete fuser unit (FU1).

I would like to try and do the rebuild option again, if I could only get instructions showing me how to do it properly. Is there anywhere I can download instructions, watch a video or get any advice for this project?

Thank you in advance for any help you can provide.

Shawn

[copiersandservicing1]

Its an old machine and there never was really an instruction guide to fitting the HK kit but here are the few pages out of the manual regarding Disassembly and assembly it may help you.

[rightbrained]

The files you provided are much appreciated and will help greatly. Your response does give rise to another question. Is there a place I can find the complete manual for my copier so I can maintain other future issues as well? I have downloaded various manuals online, but none are as detailed as the pages you provided.

[copiersandservicing1]

Here you go!!
Its a large file so give it time to load up then it you should get the option to download it.

Request Rejected

[copiersandservicing1]

Here you go!!
Its a large file so give it time to load up then it you should get the option to download it.

Request Rejected

[copiersandservicing1]

it wont allow me to post the link if you pm me your email I can send the link that way.
hope this helps.