MX-3070-4070-5070-6070N

[copierdude1114]

If you run into this issue, run around 25 or so copies, open up the fuser guide and see if it's accumulated moisture on the edge. Damp paper (even from a new ream) has been my issue with this exact jam. Ran across the street to another school that we have machines at, grabbed some of their paper, ran the whole ream with no jams, or moisture. But this has just been what I've been finding a lot with this series.

[jerrysandstrom]

I stand corrected ! The jam came back today


Skickat från min iPad med Tapatalk

[mansart]

We are currently working with our Sharp rep on this. We're in the guinea pig stage. A bulletin should be out soon. Can't get into too much detail but I can tell you that if you run your paper short edge until the fix is officially released you'll be fine.

Is this the fix you were referring to? The bulletin really does little to explain the purpose of the mod
MFP-TB-1483.PDF

[JR2ALTA]

not sure. we were adding mylar to the dummy punch entrance.this looks like the finisher enterance area.

[spanky]

See attached bulletin

[Alpanapa]

or maybe this will help

See attached bulletin

[SpYdAsWeB]

Hi chaps,

there is now an official modification for this. See the new bulletin attached...

or maybe this will help

See attached bulletin

[Toner Boy]

Hard to believe we're having to deal with this again, had same issue with 3501's and dummy punch mylar way back when. Total dejavu

[branjake]

We have been having multiple problems with these finishers, still waiting on a fix.

[1090tech]

We had this problem with a 3070 and it turned out to be the customers choice of paper. They used bargain bin paper from that came out of the fuser with excessive curl and jammed where the customer could not reach it. We got them to use higher quality paper and the the machine stopped jamming.