Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 8 of 8
  1. #1
    Technician
    Join Date
    Feb 2013
    Location
    sheffield
    Posts
    39
    Rep Power
    23

    MX2610 Faint Prints/Copies

    I have a MX2610 which has really faint colour copies , prints and pcl test charts.
    It has been fully serviced and calibrated with new drums , charges and devs, removed and cleaned laser slit glasses and removed and cleaned and reseated hv board.Any advice welcome.

    Thanks

  2. #2
    Trusted Tech 50+ Posts danceswrabbit's Avatar
    Join Date
    Dec 2013
    Location
    Carrollton Ga.
    Posts
    60
    Rep Power
    21

    Re: MX2610 Faint Prints/Copies

    I am working on a similar but intermittant problem on a 465. It did not seem to be any of the hv stuff. When I pulled and replaced the lsu the problem went away for about a month. When I replaced the lsu the problem went away for about a month. This week I am replacing the lsu mother pwb. On mine it seems that removing and reinstalling the lsu mother pwb clears it for a bit. Good luck.

  3. #3
    Senior Tech 250+ Posts
    Join Date
    Nov 2016
    Location
    Bremen
    Posts
    255
    Rep Power
    20

    Re: MX2610 Faint Prints/Copies

    I have the same problem at MX-3110.
    All new, nothing works.

    Hotline says: Clean the color image density sensor & the gray field inside !!!

    It works.

    Nice copies,nice prints

  4. #4
    Technician
    Join Date
    Feb 2013
    Location
    sheffield
    Posts
    39
    Rep Power
    23

    Re: MX2610 Faint Prints/Copies

    Quote Originally Posted by OlliK1969 View Post
    I have the same problem at MX-3110.
    All new, nothing works.

    Hotline says: Clean the color image density sensor & the gray field inside !!!

    It works.

    Nice copies,nice prints
    The density sensors on the dev units. And what's the grey field ??

  5. #5
    Field Supervisor 500+ Posts
    MX2610 Faint Prints/Copies

    mansart's Avatar
    Join Date
    Apr 2009
    Posts
    843
    Rep Power
    54

    Re: MX2610 Faint Prints/Copies


  6. #6
    Technician
    Join Date
    Feb 2013
    Location
    sheffield
    Posts
    39
    Rep Power
    23

    Re: MX2610 Faint Prints/Copies

    Thank you ,

    But as the picture is a gif i cant read what it says its too small.

    Where is the colour sensor located and the grey field. are they on the dev un its or is it the 2 sensors on the back of the machine inside or the 2 (mono and colour ) registration sensors.

    Sorry for the trouble

  7. #7
    Field Supervisor 500+ Posts
    MX2610 Faint Prints/Copies

    mansart's Avatar
    Join Date
    Apr 2009
    Posts
    843
    Rep Power
    54

    Re: MX2610 Faint Prints/Copies

    gf.pdf

    Registration sensor

  8. #8
    Senior Tech 250+ Posts
    MX2610 Faint Prints/Copies


    Join Date
    Nov 2010
    Location
    gardner, MA
    Posts
    436
    Rep Power
    37

    Re: MX2610 Faint Prints/Copies

    do adjustment 3 from the adjustment section of the service manual, this adjusts the registration/process control sensors for the transfer belt.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here