Page 1 of 2 12 LastLast
Results 1 to 10 of 15
  1. #1
    Senior Tech 250+ Posts
    Join Date
    Feb 2014
    Location
    Bristol
    Posts
    254
    Rep Power
    10

    Sharp MX2614 - C4-00 Error

    Ok, called out to a MX2614 today with a C4-00 code, replaced the PTC Unit and then it got interesting!!

    Machine works ok when using mono but when you try to copy or print in colour the C4-00 code comes back.

    Cleaned ID sensors, Drums etc but the fault remains.

    Anyone come across this?


    Sent from my iPhone using Tapatalk


  2. #2
    Technician
    Join Date
    Nov 2016
    Location
    Bremen
    Posts
    29
    Rep Power
    3

    Re: Sharp MX2614 - C4-00 Error

    Hi

    please control this CCE1479.pdf


  3. #3
    Senior Tech 250+ Posts
    Join Date
    Feb 2014
    Location
    Bristol
    Posts
    254
    Rep Power
    10

    Re: Sharp MX2614 - C4-00 Error

    Quote Originally Posted by OlliK1969 View Post
    Hi

    please control this CCE1479.pdf
    ???


  4. #4
    Senior Tech 100+ Posts
    Join Date
    Dec 2009
    Posts
    162
    Rep Power
    18

    Re: Sharp MX2614 - C4-00 Error

    I had this problem before. You need to replace the transfer switching clutches in the back of the machine. If you take off the toner waste bottle and run a black copy and watch the black cam on front of the transfer unit and then run a color you will see that cam move as the clutch slipps and then you get the code. you have to remove the whole drive assy that goes across the back of the machine to replace the clutches. Its not very hard to get off.


  5. #5
    Senior Tech 100+ Posts
    Join Date
    Dec 2009
    Posts
    162
    Rep Power
    18

    Re: Sharp MX2614 - C4-00 Error

    Ok,I see what I posted about the clutches is the same as the bulliten from the post before from olik1969. I have found this to be almost as common as the board causing the problem.


  6. #6
    Senior Tech 100+ Posts
    Join Date
    May 2010
    Location
    Dallas, TX
    Posts
    148
    Rep Power
    17

    Re: Sharp MX2614 - C4-00 Error

    Replace the transfer control PWB . We had a 2610 do the same thing. Replaced the primary and secondary belt units and both main power boards, the ptc and did a full pm and still were dead. Replaced the transfer control pwb and now works like a champ. RDENU0133FCPZ TC PWB


  7. #7
    Technician Sharpshooter's Avatar
    Join Date
    Jan 2009
    Posts
    22
    Rep Power
    19

    Re: Sharp MX2614 - C4-00 Error

    Check that Transfer PWB has not been fitted correctly.
    See the attached file.

    C4_00.pdf


  8. #8
    Senior Tech 250+ Posts
    Join Date
    Feb 2014
    Location
    Bristol
    Posts
    254
    Rep Power
    10

    Re: Sharp MX2614 - C4-00 Error

    Changed black & colour transfer belt clutches and it's sorted.


    Sent from my iPhone using Tapatalk


  9. #9
    Trusted Tech 50+ Posts
    Join Date
    Jul 2008
    Posts
    94
    Rep Power
    20

    Re: Sharp MX2614 - C4-00 Error

    I also had problem C4-00
    A malfunction of the high-voltage unit is detected.
    Out of order: transistor, diode and fuse.
    The photo is attached.

    Attached Images Attached Images

  10. #10
    The New Guy 1,000+ Posts ruben's Avatar
    Join Date
    Oct 2012
    Location
    Bristol, UK
    Posts
    1,193
    Rep Power
    42

    Re: Sharp MX2614 - C4-00 Error

    Quote Originally Posted by vlad_ View Post
    I also had problem C4-00
    A malfunction of the high-voltage unit is detected.
    Out of order: transistor, diode and fuse.
    The photo is attached.
    This part has since been modified to prevent this, new P/N is RDENU0154FCP2.

    See: MX2614N-MX3114N256.pdf


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here