Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Senior Tech 100+ Posts
    MX-2301 light prints


    Join Date
    Apr 2012
    Location
    Brisbane
    Posts
    177
    Rep Power
    13

    MX-2301 light prints

    Hello everyone

    recently replaced drums, devs, charge kits & customer is complaining of faint prints, as if the devs have toned down - any suggestions?

    also require latest firmware if anyone can help (andy@electrepairs.com.au)

    many thanks

    Andy


  2. #2
    Technician
    MX-2301 light prints

    JParker's Avatar
    Join Date
    Jul 2015
    Location
    Roswell, NM
    Posts
    27
    Rep Power
    5

    Re: MX-2301 light prints

    How do the primary and secondary transfer belts look?


  3. #3
    Senior Tech 100+ Posts
    Join Date
    Jun 2016
    Location
    Kansas
    Posts
    112
    Rep Power
    4

    Re: MX-2301 light prints

    I am assuming you have run all the color adjustments sims, I would then check the contacts where the drums connect to the back of the machine and make sure those are clean.


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here