Dislikes:
0
-
Re: MX-M354N Err Failed to expand ARM9 prg
What is the part number for the SD card you need? Ill look and see if I have the image for it, and provide you it if I have it
-
Re: MX-M354N Err Failed to expand ARM9 prg
This is from the parts manual. Not sure which applies? I got an 8gb card
MX-M354N SD card matrix.JPGMX-M354N SD card part numbers.JPG
-
Re: MX-M354N Err Failed to expand ARM9 prg
This is from the parts manual. Not sure which applies? I got an 8gb card
MX-M354N SD card matrix.JPGMX-M354N SD card part numbers.JPG
-
Re: MX-M354N Err Failed to expand ARM9 prg
maybe it's VHi0MFP10011C if I read the chart right?
-
Re: MX-M354N Err Failed to expand ARM9 prg
I am sending you a link to my server and a username and password. In the FTP folder will be all the stuff you need including the latest firmware for the MXM354 w/o HDD and instructions. Once you create the SD card you will need to do an emergency update with firmware provided. You may also need to reinstall the emanual or watermark firmware if it applies to that model. if your machine has a hard disk I dont have the sd card image for that one.
web address
https://76.185.89.211/remote
Login
SharpFTP
Password
Sh@rpman
-
Re: MX-M354N Err Failed to expand ARM9 prg
SD card image write fail.jpg
The source (image) is 8010MB and my card has 7948.2 space to write, so it's failing after 99% complete.
-
Re: MX-M354N Err Failed to expand ARM9 prg
You need a 16gb card. Some 8gb cards are 8008 and some are like yours.
-
Re: MX-M354N Err Failed to expand ARM9 prg
Everything I read so far was 4gb may not be enough, so get 8gb.
This is strange, because the file itself shows it's size is about 128MB
-
Re: MX-M354N Err Failed to expand ARM9 prg
The reason it's odd is because the machine has no hard disk so the stuff that would normally be on the HDD are then stored on the larger SD card. That file was created off a factory 8gb card. The reason you use a 8 GB card for the machines that take a 4gb card is because not all 4gb cards are 4008mb. Some are only 3998 or 4001 and they will fail like yours did. The same goes for 8gb cards. Not all are 8008 MB. So the easiest thing to do is buy a 16gb card.
-
Re: MX-M354N Err Failed to expand ARM9 prg
Nearby walmart has 16gb in stock. Shall I do a firmware update AFTER or before replacing the sd card. and is it done by USB thumbdrive. If yes, is there a service usb port different than the customer's usb port? Such as in the back for svc oonly (Konica Minolta does that)
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks