Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    jmills
    Guest

    Mxm264N POSD_N Jam

    I have a 264 that is jamming Intermitttently on duplexing. Throws a POSD_N jam code. But before it stops its a loud almost grinding noise. It jammed on me two times out of 50. I've replaced the delivery unit and lower right side door. Now I'm thinking duplex motor. Mfp only has 302k on it. Any help would be great. Thanks so much!

  2. #2
    Technician
    Join Date
    Jan 2015
    Location
    Westfield, MA
    Posts
    14
    Rep Power
    19

    Re: Mxm264N POSD_N Jam

    I've seen this a few times, and it's most likely the duplex motor failing. I figured it out by stopping the gear by hand while running the duplex motor through the sim. It looked like the belt was skipping, but then I saw that the motor itself wasn't turning. I've swapped out just the motor and it's been good again.

  3. #3
    jmills
    Guest

    Re: Mxm264N POSD_N Jam

    Thank You what_moustache!!!!
    I ended up swapping the duplex motor and that took care of the issue.
    Much appreciated. Thanks again.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here