Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5
  1. #1
    Senior Tech 100+ Posts guitar9199's Avatar
    Join Date
    Sep 2016
    Location
    Murfreesboro, TN
    Posts
    173
    Rep Power
    5

    Sharp MXB402SC showing F2-64 error

    Hey gang... I need some HELP!!!

    I have a Sharp 402 black and white A4 mfp that's tossing an F2-64 error code. That error points to the toner drive motor, but the Sharp service manual does not show ANY method of removing that part!!

    Either I'm missing something, or it got lost in translation!! Does anyone have any suggestions or ideas? Frankly, I'm stuck...and that's rare...LOL!

    Thanks in advance, Steve


  2. #2
    Trusted Tech 50+ Posts
    Join Date
    Oct 2014
    Location
    salisbury
    Posts
    50
    Rep Power
    7

    Re: Sharp MXB402SC showing F2-64 error

    Quote Originally Posted by guitar9199 View Post
    Hey gang... I need some HELP!!!

    I have a Sharp 402 black and white A4 mfp that's tossing an F2-64 error code. That error points to the toner drive motor, but the Sharp service manual does not show ANY method of removing that part!!

    Either I'm missing something, or it got lost in translation!! Does anyone have any suggestions or ideas? Frankly, I'm stuck...and that's rare...LOL!

    Thanks in advance, Steve
    Have you tried a new toner cartridge. Have had defective ones in past and how does DV unit look and turn.


  3. #3
    Senior Tech 100+ Posts ntbann's Avatar
    Join Date
    Jan 2012
    Location
    Port Huron
    Posts
    211
    Rep Power
    15

    Re: Sharp MXB402SC showing F2-64 error

    Pull the toner out cheat the door switch and run a sim 10-1 and see if the toner motor runs. You may have to run 7-1 and turn off DV check first for 10-1 to run.


  4. #4
    Senior Tech 250+ Posts
    Sharp MXB402SC showing F2-64 error


    Join Date
    Oct 2008
    Location
    Manchester, NH
    Posts
    402
    Rep Power
    23

    Re: Sharp MXB402SC showing F2-64 error

    It may occur if customer stands toner on end. Maybe, beat up the toner a bit and reboot the machine.


  5. #5
    Senior Tech 100+ Posts
    Join Date
    Dec 2009
    Posts
    159
    Rep Power
    17

    Re: Sharp MXB402SC showing F2-64 error

    It looks like the motor is behind the big board in back of machine obviously behind the toner cartridge. I think you just take stuff apart till you get to it. That would be quicker than trying to step through the book anyhow.


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here