Results 1 to 3 of 3
  1. #1
    Senior Tech 250+ Posts
    MX-4070 with MX-FN28 Stapling issue


    Join Date
    Oct 2008
    Location
    Manchester, NH
    Posts
    404
    Rep Power
    23

    MX-4070 with MX-FN28 Stapling issue

    When compiling the paper in the compiler, not all sheets are brought back in. When it goes to staple 1 or 2 sheets will be out 1 to 1.5 inches and miss the staple.

    Replaced the roller, shaft and gear that brings the paper back in to the compiler. The shaft and gear are both updated parts.

    Any help is appreciated.


  2. #2
    Senior Tech 250+ Posts
    MX-4070 with MX-FN28 Stapling issue


    Join Date
    Oct 2008
    Location
    Manchester, NH
    Posts
    404
    Rep Power
    23

    Re: MX-4070 with MX-FN28 Stapling issue

    You may be able to disregard. Appears to have something to do with static. Rubbed a fabric softener sheet and has not screwed up in 14 sets. Could not get past one set without screwing up befor.


  3. #3
    Senior Tech 100+ Posts
    Join Date
    May 2010
    Location
    Dallas, TX
    Posts
    148
    Rep Power
    17

    Re: MX-4070 with MX-FN28 Stapling issue

    I have seen this issue and have done the fabric softener sheet thing too. Wanted to point out that there are SEVERAL firmware updates for these, some major having to do with machine timing. May want to look at doing those if you havent already. If you do, make sure and update the OCR firmware before the machine firmware or you may end up with a dead machine.


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here