Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 8 of 8
  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Jul 2008
    Posts
    97
    Rep Power
    32

    AR-507 With RSPF

    Council is necessary. AR-507 Run 1200K
    Without use RSPF - works normally. But at use RSPF gives out jam copies on an exit. The copy almost left, but 1 centimetre remained in the conclusion block (Finisher is absent). jam occurs not always, but it is very frequent. Without use RSPF all is excellent. How can influence RSPF on jam copies?
    The device costs in a distance from a civilisation (a taiga, bears and a pipe with gas).
    Pressure, temperature and humidity within norm.

  2. #2
    michael517mi
    Guest

    country code in machine set properly?

    an easy check, keep it simple.

  3. #3
    Trusted Tech 50+ Posts
    Join Date
    Jul 2008
    Posts
    97
    Rep Power
    32
    Yes. All is adjusted correctly. Worked perfectly within 7 years. And now a problem. I have spent all the day in the empty. Anything to a head does not come. One, apparently, is not connected with another. As copying process, begins only after process of reading and these processes are not crossed (at manufacturing of one copy).
    I tend to thought, that all the same a problem with definition of a format of the original. But: Auto original definition – А4, a tray and paper А4.

  4. #4
    Trusted Tech 50+ Posts paul bristol uk's Avatar
    Join Date
    Nov 2005
    Posts
    51
    Rep Power
    38
    Did it have a finisher that has just been removed? if so you will need some exit springs

  5. #5
    Trusted Tech 50+ Posts
    Join Date
    Jul 2008
    Posts
    97
    Rep Power
    32
    No no no. Finisher there was never. These are difficulties of transfer of electronic translator PROMT. I know, that at installation Finisher the gear wheel in an output block varies. But it not that case

  6. #6
    Master Of The Obvious 10,000+ Posts
    AR-507 With RSPF

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,444
    Rep Power
    462

    Inverter Gate

    I've got a theory for you:

    When you feed from the copyboard glass there is no need for face down delivery. All the copies are the same.

    When you use the RSPF, face down delivery is required to keep the copies in the correct order. Take a look at the inverter gate in the delivery door. I suspect when you check the jam codes you'll find POD2-NR and POD1-SR.

    Misfeeds (jam code POD2_NR, POD1_SR) after the paper exits into the finisher. The copies are not inverted in the tray on AR-507. The lever that operates the inverter gate in the delivery breaks. The paper is not inverted before exiting. Repair or replace the inverter gate (PGiDM1878FCZZ).

    What jam codes are you getting? =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  7. #7
    Trusted Tech 50+ Posts
    Join Date
    Jul 2008
    Posts
    97
    Rep Power
    32
    Many thanks to you blackcat4866. You have very much helped me. And why I have not guessed? Absolutely precisely. In one case the text on a copy on the one hand sheet, and in other – with another. Truly. And after all I, hardly have not broken the brain. Probably I had a stereotype of the big analogue copy machines.
    Codes have coincided
    Last edited by vlad_; 08-06-2008 at 07:57 AM.

  8. #8
    Master Of The Obvious 10,000+ Posts
    AR-507 With RSPF

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,444
    Rep Power
    462
    I'm glad to help.

    The first time I saw this problem I was totally confused by the face up delivery when it was supposed to be face down. That machine had the AR-FN1N finisher, and I spent hours on the stupid finisher. Finally I disconnected it, and the problem remained. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here