Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6
  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Nov 2014
    Location
    Butte, Montana
    Posts
    50
    Rep Power
    8

    MX-6070N with MX-FN28 - FNRMDLT

    Hi Guys,

    Since I first installed this machine it has been jamming between the finisher & the MX-RB25. At first with all sizes of paper & so because their were no bulletins on Sharp IDNC at the time I made up my own fix by putting mylar on the finisher entrance. That worked for a long time but now & only with paper longer than letter size is jamming. With a code of FNRMDLT.

    Most recently, I've tried changing the springs on the sensors in the MX-RB25 to no avail.

    From the time I worked on this last time, I kind of remember seeing a bulletin on slowing the paper down due to bending of the sheets leaving the pass unit but now I can't find it.

    Thanks guys


  2. #2
    Senior Tech 100+ Posts
    MX-6070N with MX-FN28 - FNRMDLT


    Join Date
    Mar 2009
    Posts
    137
    Rep Power
    20

    Re: MX-6070N with MX-FN28 - FNRMDLT

    Perhaps this?

    MFP-TB-1646

    "Guide sheet has been added to the open/close paper guide section to improve thedelivery performance of the paper curled upward"


    Quote Originally Posted by coopers1305 View Post
    Hi Guys,

    Since I first installed this machine it has been jamming between the finisher & the MX-RB25. At first with all sizes of paper & so because their were no bulletins on Sharp IDNC at the time I made up my own fix by putting mylar on the finisher entrance. That worked for a long time but now & only with paper longer than letter size is jamming. With a code of FNRMDLT.

    Most recently, I've tried changing the springs on the sensors in the MX-RB25 to no avail.

    From the time I worked on this last time, I kind of remember seeing a bulletin on slowing the paper down due to bending of the sheets leaving the pass unit but now I can't find it.

    Thanks guys



  3. #3
    Senior Tech 100+ Posts
    Join Date
    Dec 2009
    Location
    Waukegan IL
    Posts
    213
    Rep Power
    21

    Re: MX-6070N with MX-FN28 - FNRMDLT

    Is the finnisher height set right so the finnisher entrance guide matchesthe exit of the rb unit?


  4. #4
    Technician
    MX-6070N with MX-FN28 - FNRMDLT


    Join Date
    Feb 2011
    Location
    Newry
    Posts
    43
    Rep Power
    15

    Re: MX-6070N with MX-FN28 - FNRMDLT

    Has anyone got this bulletin? Doesn't seem to be available on UK site

    Quote Originally Posted by RascalMJ View Post
    Perhaps this?

    MFP-TB-1646

    "Guide sheet has been added to the open/close paper guide section to improve thedelivery performance of the paper curled upward"



  5. #5
    Senior Tech 100+ Posts
    Join Date
    Jun 2016
    Location
    Kansas
    Posts
    151
    Rep Power
    6

    Re: MX-6070N with MX-FN28 - FNRMDLT

    we had this issue with MX-4570N with MX-FN28 and the entrance guide on the finisher was bent on delivery of the machine to the customer. They were in the midst of a remodel and they moved the machine twice more and the tech had to go out and realign the guide every time.


  6. #6
    Field Tech 500+ Posts
    MX-6070N with MX-FN28 - FNRMDLT

    michaelc's Avatar
    Join Date
    Mar 2011
    Location
    England
    Posts
    590
    Rep Power
    25

    Re: MX-6070N with MX-FN28 - FNRMDLT

    Have the foam rollers been removed from the exit/delivery unit during set up ?

    It didn't say that I couldn't do it in the manual.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here