We have a MX3140 that has an error code F2-25
It came up in December and we were able to clear the code with a firmware update
in February the code came back and none of the discharge lamps will light with the sim
we have updated firmware, replaced the PCU-PWB, checked the harness all to no avail.
Any help would be appreciated
Just talked to the Sharp Hotline and they are suggesting we change the Discharge Lamp boards, and to change all 4 as long as we have to go that deep into the machine. we will get them ordered and let you know the results.
Oh man....I feel for you, had to replace all these awhile back, NOT fun!! And I did it before they came out with the instructions on the bulletin . But have not had any problems since, so there is that...
we have replaced all 4 of the discharge lamps and have had no issues with that for over 10 days so hope that is corrected. We did have a U2-41 error which we were able to reset with the sim, the first part of the week. We are hoping that is not going to be an upcoming issue.