Results 1 to 4 of 4
  1. #1
    Service Manager 250+ Posts


    Tech2002's Avatar
    Join Date
    Aug 2008
    Posts
    260
    Post Thanks / Like
    Rep Power
    20

    Sharp MX-FNX9 Finisher Installed on a MX-4101 Color

    I've got an error code FPDD_S relates to a Punch Unit with Finisher. There is no Punch Unit. The Stalls occur when the last sheet of paper exits into the receiving tray or, more often, stalls occur just before Bundle Exit Paper Transport Roller. The unfortunate is that this occurs intermittently, making it difficult to trouble shoot. Tried changing the Paper Exit Sensor with no luck. Machine is very sound and has been working fine up to this point. I am certain that it is the finisher and not the machine.


    Anyone see this happen before? Any suggestions would be greatly appreciated.


  2. #2
    Technician xring1958's Avatar
    Join Date
    Mar 2016
    Location
    Houston, Texas
    Posts
    34
    Post Thanks / Like
    Rep Power
    3

    Re: Sharp MX-FNX9 Finisher Installed on a MX-4101 Color

    FSTPD.JPGThe manual shows this is the sensor that is causing the code


  3. #3
    Service Manager 250+ Posts


    Tech2002's Avatar
    Join Date
    Aug 2008
    Posts
    260
    Post Thanks / Like
    Rep Power
    20

    Re: Sharp MX-FNX9 Finisher Installed on a MX-4101 Color

    Quote Originally Posted by xring1958 View Post
    FSTPD.JPGThe manual shows this is the sensor that is causing the code
    Thank you. I'll try changing the sensor. I'm not sure how I missed that according to the code that was coming up for me.


  4. #4
    Service Manager 250+ Posts


    Tech2002's Avatar
    Join Date
    Aug 2008
    Posts
    260
    Post Thanks / Like
    Rep Power
    20

    Re: Sharp MX-FNX9 Finisher Installed on a MX-4101 Color

    Quote Originally Posted by Tech2002 View Post
    Thank you. I'll try changing the sensor. I'm not sure how I missed that according to the code that was coming up for me.
    I changed out three sensors with no luck. I could never see any arm sticking but re-cleaned and used a special spray, checked the system again - it worked fine. Go Figure.

    I appreciated the input.


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here