Thanks:
0
Dislikes:
0
-
Trusted Tech
50+ Posts
- Rep Power
- 24
MXB420SC transfer blade keeps flipping
I have a customer that has a MXB402SC. First call I got was for a h5-01 error, after inspecting the machine I found that the transfer blade flipped and damaged the belt in the process, so i replaced the entire unit. that was back in April. Then last week I got a call for the same H5-01 error. Same thing again, the transfer blade flipped. this time it did not damage the belt, so i put a new blade on, conditioned the belt and tested it, worked great. now today same thing h5-01 error. I havent been there yet but something tells me its going to be the blade flipped again.
Anyone ever run into this or have any suggestions? Thanks in advance!
-
Re: MXB420SC transfer blade keeps flipping
YES!!! these machines are notorious for flips. Suggestions? Two things, make sure your using the new blades with the two new springs. There is a bulletin for it.
Secondly, use the yellow toner powder designed for transfer belts by sharp.
Believe me, that's all there is.
New style blade with new springs, and the most important, the Yellow Toner designed for transfer belts by SHARP.
Don't forget to be generous with the yellow toner. 👌
Good luck.
Sent from my ONEPLUS A3000 using Tapatalk
-
Re: MXB420SC transfer blade keeps flipping
Here you go. A little late, I was away from my computer yesterday.
Here is the blade bulletin:
MFP-TB-987.PDF
And this is the powder bulletin. This bulletin supersedes any information conflicts with the Service Manuals:
MFP-TB-1247.PDF
Good luck.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks