Hi all,
Need guide and info on Mx2310 ,go to sim44-2 ,50-22 , 44-27 ,44-6 all complete.
But when go to sim44-26 ,it show Error -K
Clean image density sensor but the problem remain,hope some one can shield some light on it.
Thank you in advance
Hi all,
Need guide and info on Mx2310 ,go to sim44-2 ,50-22 , 44-27 ,44-6 all complete.
But when go to sim44-26 ,it show Error -K
Clean image density sensor but the problem remain,hope some one can shield some light on it.
Thank you in advance
sounds like it may be a dirty sensor by the secondary TC...
44-27 to dump the previous values. Check the back side of the pro-con sensor covers, they use the back surface to calibrate. If they are covered, 44-26 will fail.
50-22
44-2
44-6
44-26
46-74
Rinse and repeat.....
Failing to plan is planning to fail!!!
After change the image density sensor ,problem remain.
Changing drum kit ,solve the problem.
Bookmarks