Doing Calibration on Sharp MX-2310

[Peter Sim]

Hi all,
Need guide and info on Mx2310 ,go to sim44-2 ,50-22 , 44-27 ,44-6 all complete.
But when go to sim44-26 ,it show Error -K
Clean image density sensor but the problem remain,hope some one can shield some light on it.
Thank you in advance

[dwarf]

sounds like it may be a dirty sensor by the secondary TC...

[mojorolla]

44-27 to dump the previous values. Check the back side of the pro-con sensor covers, they use the back surface to calibrate. If they are covered, 44-26 will fail.

50-22
44-2
44-6
44-26
46-74
Rinse and repeat.....

[Peter Sim]

44-27 to dump the previous values. Check the back side of the pro-con sensor covers, they use the back surface to calibrate. If they are covered, 44-26 will fail.

50-22
44-2
44-6
44-26
46-74
Rinse and repeat.....

Hi, can i know where is pro-con sensor locate?

[Peter Sim]

After change the image density sensor ,problem remain.
Changing drum kit ,solve the problem.