Page 1 of 2 12 LastLast
Results 1 to 10 of 14
  1. #1
    Trusted Tech 50+ Posts
    Mxm565 build up on fuser guide


    Join Date
    Aug 2011
    Location
    Milford,ohio
    Posts
    76
    Rep Power
    26

    Mxm565 build up on fuser guide

    Just curious if anyone has seen a problem with toner sticking to the exit area of fuser? Any fixes? I have that one that only takes a few days to have it again.

  2. #2
    Senior Tech 100+ Posts
    Join Date
    Oct 2012
    Location
    LI, NY
    Posts
    168
    Rep Power
    25

    Re: Mxm565 build up on fuser guide

    it may be time for a PM with a drum and developer...or at least clean it and recalibrate...

  3. #3
    Field Supervisor 500+ Posts
    Mxm565 build up on fuser guide

    mansart's Avatar
    Join Date
    Apr 2009
    Posts
    843
    Rep Power
    54

    Re: Mxm565 build up on fuser guide

    ditto above.....

    we are seeing the same thing but only on machines we are "stretching"

  4. #4
    Technician
    Join Date
    Apr 2012
    Location
    adrian
    Posts
    23
    Rep Power
    25

    Re: Mxm565 build up on fuser guide

    we are seeing the same issues with our high volume boxes. pms are done on time

  5. #5
    Trusted Tech 50+ Posts
    Mxm565 build up on fuser guide


    Join Date
    Aug 2011
    Location
    Milford,ohio
    Posts
    76
    Rep Power
    26

    Re: Mxm565 build up on fuser guide

    Quote Originally Posted by ktucker View Post
    we are seeing the same issues with our high volume boxes. pms are done on time
    Yep, same with this one, volume is high on it also. Even tried a new fuser.

  6. #6
    Senior Tech 100+ Posts
    Join Date
    Jul 2011
    Posts
    143
    Rep Power
    27

    Re: Mxm565 build up on fuser guide

    You may want to look at the DV unit. They did change the doctor blade.

  7. #7
    Field Tech 500+ Posts
    Mxm565 build up on fuser guide

    michaelc's Avatar
    Join Date
    Mar 2011
    Location
    England
    Posts
    590
    Rep Power
    37

    Re: Mxm565 build up on fuser guide

    Just my 2 pence (im english) a lot of people dont clean the dev filters on the black and white machines.
    If its high volume you can sometimes get to stage where the guides can loose the curvature so the paper does not flow over it but crashes and passes with out jamming. You can only really tell when putting them side by side.
    It didn't say that I couldn't do it in the manual.

  8. #8
    Senior Tech 100+ Posts sharpie's Avatar
    Join Date
    Feb 2011
    Location
    MI
    Posts
    171
    Rep Power
    30

    Re: Mxm565 build up on fuser guide

    These units seem to pull developer and toner from the rear side of the drum which accumulates on the fuser guide. check your charge corona and drum blade just outside the image area on the drum.

  9. #9
    Technician
    Join Date
    Aug 2017
    Posts
    21
    Rep Power
    14

    Re: Mxm565 build up on fuser guide

    I am following this thread closely. We have one doing this. We have changed the drum, fuser, MK, dev and dev unit. The strange thing is the customer has never said there is toner smearing on their prints. But after 20,000 sheets or so they will get jamming issues due to the amount of toner built up on the guide above the fuser (still part of the fuser unit)


    We have monitored the power and have seen some dips below 100v. So we have suspended anymore troubleshooting until the customer addresses this.

    Thanks
    Last edited by OperatorError; 08-17-2017 at 08:29 PM.

  10. #10
    The Wolf 2,500+ Posts mojorolla's Avatar
    Join Date
    Jan 2010
    Location
    Cleveland OH
    Posts
    2,512
    Rep Power
    125

    Re: Mxm565 build up on fuser guide

    I see a new bulletin that was issued yesterday. Change of DV unit to deal with toner dispersion from DV unit.
    MFP-TB-1643
    There is also a bulletin for the transfer unit, MFP-TB-1567


    Failing to plan is planning to fail!!!

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here