Thanks: 0
Likes: 0
Dislikes: 0
Hello everyone:
I am working on a Sharp AR-250 with an AR-SP1 adf the multi-feeds.
Looking at the parts manual, I ordered #38 (PN:OCW2235P358// ) ans # 39 ( PN: OCW2235P304// ). Neither one is the white sep. sheet located below the feed roller. The parts manual does not show the white sep. sheet or at least it does not look like it. Is it # 40 ( PN: OCW2235P371// ) ?
Thanks in advance.
Claudio
*Have a great weekend.
Lucky you!
I only had two or three of these AR-SP1 and the only thing I ever had to do to them was replace the exit guides. The plastic just dries out.
Sorry I can't help with the separation pad part number. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Usually the sep pad is an assembly. I could not find the sp1 parts guide but the rspf for the 507 sep pad assy is OCW2254K073B/. I would not think it is the same though it has a white pad.
Thanks for your help guys.
I'll need to make some phone calls to find out about this pad.
Claudio
Reply With Quote
Bookmarks