Thanks:
0
Likes:
0
Dislikes:
0
-
Technician
- Rep Power
- 24
SHARP MX-2310
Hi everyone,
I have trouble with Sharp mx-2310u.
During printing, machine stops and the control panel switch off. Only light obove on/off button is on. When I open the front door the control panel goes on, and appers warning (close the front door) and I can go to service mode. When I close the front door, the control panel goes to off and no response.The same think is with the side door.
I have replace SD-card, but no resoult. Proform SIM-14,16
Any Idea???
-
Re: SHARP MX-2310
Have you checked for a loose connection to the control panel?
-
Trusted Tech
50+ Posts
- Rep Power
- 14
Re: SHARP MX-2310
Hi There some of the older machines that the clutch wires shorted out and caused problems like that. technical report ARE996
-
Technician
- Rep Power
- 24
Re: SHARP MX-2310
hi,
could you send me this tecnical report?
-
Trusted Tech
50+ Posts
- Rep Power
- 14
Re: SHARP MX-2310
ARE996.pdf
here Is that Technical report sorry I did not check messages.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks