LinkBack URL
About LinkBacksReplaced with new O.E.M. drum, toner/dv, changed t/s charge in door, cleaned laser glass above drum. Any thoughts?
Replaced with new O.E.M. drum, toner/dv, changed t/s charge in door, cleaned laser glass above drum. Any thoughts?
Is the issue the same off the glass as through the document feeder? If it is only from the document feeder then I would suspect that ambient light is causing the light leading edge.
Are you using OEM toner? =^..^=
RTFM
Do yourself a favor. Buy a manual and read up on your problem before posting. I enjoy helping those that are willing to help themselves. =^..^=
Yes, OEM toner and drum.
James,
I am not personaly aquanted with your particular model copier. But did not see you mention cleaning the mirrors most units use a series of mirrrors to reflect the image thru the magnification lense. If this is the case clean all mirrors infront of the lense and behind the lense. If this is not the case please ignore the post.
P.S Many digital units use a laser to write and the mirror attached to the mirror motor may need cleaning. One edge that cuts the air will gather excess dust and cause light print. Have experienced this on printer and fax machines as well. Good luck
aeroinc
Last edited by aeroinc; 09-02-2008 at 05:05 PM. Reason: machine error
Posting Permissions 
Reply With Quote
Bookmarks