Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 7 of 7
  1. #1
    Technician
    Join Date
    Sep 2016
    Location
    littleton, colo
    Posts
    32
    Rep Power
    3

    sharp mx-m565n water mark

    I got the water mark to down load. I go to 49 then to water mark. touch display but for some reason it wont black out to start down load. Do I need to hit the dip switch on main board. I did extract the file. any thoughts would be helpful. Thanks


  2. #2
    Senior Tech 100+ Posts spanky's Avatar
    Join Date
    Sep 2012
    Location
    Md
    Posts
    229
    Rep Power
    14

    Re: sharp mx-m565n water mark

    Does the touch panel show the file on your USB drive?


  3. #3
    The Wolf 1,000+ Posts mojorolla's Avatar
    Join Date
    Jan 2010
    Location
    C-town
    Posts
    1,629
    Rep Power
    47

    Re: sharp mx-m565n water mark

    All Sharp files from a USB must be no deeper then 1 level. If the file is in a folder INSIDE another folder, it will not see it.
    In this scenario, it will usually display two dots.

    Also, Sharp is notorious for hiding a .zip file inside of a .zip file download; you will need to double extract.




    Failing to plan is planning to fail!!!

  4. #4
    Sharp & HP Tech 100+ Posts austonrush's Avatar
    Join Date
    Jan 2010
    Location
    Guelph
    Posts
    170
    Rep Power
    17

    Re: sharp mx-m565n water mark

    Also make sure the USB drive you're using for firmware updates is formatted as FAT32. The Sharp cannot see NTFS formatting.


  5. #5
    Technician
    Join Date
    Sep 2016
    Location
    littleton, colo
    Posts
    32
    Rep Power
    3

    Re: sharp mx-m565n water mark

    I have tried everthing. Still noting. Extracted it. display just shows but the file but wont black out. Think im missing a step here. Has any one done this on this model and can I get the step to doing it. Thanks


  6. #6
    Technician moose55's Avatar
    Join Date
    Mar 2017
    Location
    Papillion, NE
    Posts
    48
    Rep Power
    2

    Re: sharp mx-m565n water mark

    Page 9-6 in the service manual details step by step instructions for the installation of the watermark firmware.

    The Moose is loose!!

  7. #7
    The Wolf 1,000+ Posts mojorolla's Avatar
    Join Date
    Jan 2010
    Location
    C-town
    Posts
    1,629
    Rep Power
    47

    Re: sharp mx-m565n water mark

    I just did a HDD wipe on a 6240 Friday.
    When I downloaded the watermark, it was zipped. I extracted it, and THE EXTRACTED FILE WAS ZIPPED. I had to unzip a second time, move to jump drive, then SIM 49 worked fine.
    I downloaded the model you are referring to and yes, it is double compressed. See below:
    Capture.jpg



    Failing to plan is planning to fail!!!

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here