Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6

Thread: MX-2610 E7-A0

  1. #1
    Technician
    Join Date
    Feb 2014
    Location
    Niceville, FL
    Posts
    43
    Rep Power
    0

    MX-2610 E7-A0

    I have a Sharp MX-2610 that has intermittent E7-A0 codes. I've already replaced the LSU with driver PWB and just replaced the LSU motherboard from a spare MX-3110 (same Part#). Within 5 minutes it popped another E7-A0. I can reset using sim 14 and it may take a few days of several weeks for it to come up again, its occurred 7 times between 4/2017 and 9/2017. Other than the harness, any suggestions?

  2. #2
    Junior Member Exper3's Avatar
    Join Date
    Jun 2015
    Location
    istanbul
    Posts
    4
    Rep Power
    0

    Re: MX-2610 E7-A0

    Hi,

    what error codes does it give?

    E7 48 Scanner expansion PWB (ACRE) ASIC memory error
    42 Image data trouble (Scanner expansion PWB (ACRE) ASIC)
    96 MFPC PWB DIMM memory check error (MFPC PWB)
    95 Printer PWB DIMM memory check error (PRINTER section)

    A0 04 Scanner expansion PWB (ACU) (ACRE) ROM error

  3. #3
    Technician
    Join Date
    Feb 2014
    Location
    Niceville, FL
    Posts
    43
    Rep Power
    0

    Re: MX-2610 E7-A0

    I apologize if I didn't make it clear in my initial post but the code is:

    E7-A0 LSU LD PWB EEPROM read/write
    error (K)
    Trouble content Write error in the EEPROM write sequence
    Detail PCU
    Cause LD PWB EEPROM trouble.
    LSU mother PWB trouble.
    Connector/harness trouble between the LD PWB and
    the LSU mother PWB.
    Connector/harness trouble between the PCU PWB
    and the LSU mother PWB.
    Check & Remedy Check the LSU, and replace if necessary.
    Check the LSU mother PWB, and replace if
    necessary.
    Check the connector/harness between the LD PWB
    and the LSU mother PWB, and replace if necessary.
    Check the connector/harness between the PCU PWB
    and the LSU mother PWB, and replace if necessary.
    Replace the LSU.

  4. #4
    The Wolf 2,500+ Posts mojorolla's Avatar
    Join Date
    Jan 2010
    Location
    Cleveland OH
    Posts
    2,512
    Rep Power
    125

    Re: MX-2610 E7-A0

    Print out the 22-6 and look at the soft switches. I have seen board replacement set all the soft switches to 1.
    This usually happens with Frontier scanner boards....


    Failing to plan is planning to fail!!!

  5. #5
    Senior Tech 250+ Posts oeshuron's Avatar
    Join Date
    May 2008
    Posts
    259
    Rep Power
    35

    Re: MX-2610 E7-A0

    Any chance this was resolved? Have a machine throwing this as well. Have replaced laser and pwb.

  6. #6
    Technician
    Join Date
    Feb 2014
    Location
    Niceville, FL
    Posts
    43
    Rep Power
    0

    Re: MX-2610 E7-A0

    i apologize for not updating this thread, I replaced the LSU motherboard and have not had anymore occurrences of the code.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here