Results 1 to 6 of 6

Thread: MX-M354N

  1. #1
    Senior Tech 100+ Posts
    MX-M354N

    Ratchet2501's Avatar
    Join Date
    Mar 2017
    Location
    Vernal, Utah
    Posts
    206
    Rep Power
    17

    MX-M354N

    Copies are tilted on this machine and I'm thinking 50-1 may be able to readjust it, might not. I've replaced the cleaning roller and fuser thus far since they were both up there.Prints are fine. At first I thought it was the adf that was the problem (crap in the gears etc) but even the flatbed is copying crooked.noreply@gmail.com_20170925_135635.pdf

  2. #2
    Senior member of CRS 2,500+ Posts
    MX-M354N

    ZOOTECH's Avatar
    Join Date
    Jul 2007
    Location
    Insane Diego, CA
    Posts
    3,365
    Rep Power
    102

    Re: MX-M354N

    Was that second page copied or the original print?

    After rechecking the .pdf, and with mansart's post, I agree that optics need adjusting. (Was it off the glass or through the doc feeder?)
    Last edited by ZOOTECH; 09-25-2017 at 09:55 PM.
    "You can't trust your eyes, if your mind is out of focus" --

  3. #3
    Field Supervisor 500+ Posts
    MX-M354N

    mansart's Avatar
    Join Date
    Apr 2009
    Posts
    843
    Rep Power
    54

    Re: MX-M354N

    If the second image is a copy of the first......you have some work in optics........looks like mirror assembly has come out of adjust and/or one of the clips that secure the mirrors have come out.

  4. #4
    Senior Tech 100+ Posts
    MX-M354N

    Ratchet2501's Avatar
    Join Date
    Mar 2017
    Location
    Vernal, Utah
    Posts
    206
    Rep Power
    17

    Re: MX-M354N

    Terrible thread authoring on my part, apologies. Yes the second page is the "copy" of the first from the flatbed. I'm only mildy scared to adjust the optics since outside of scrapping a machine I havent ever been in there. First time for everything I guess.

  5. #5
    Senior member of CRS 2,500+ Posts
    MX-M354N

    ZOOTECH's Avatar
    Join Date
    Jul 2007
    Location
    Insane Diego, CA
    Posts
    3,365
    Rep Power
    102

    Re: MX-M354N

    Quote Originally Posted by Ratchet2501 View Post
    Terrible thread authoring on my part, apologies. Yes the second page is the "copy" of the first from the flatbed. I'm only mildy scared to adjust the optics since outside of scrapping a machine I havent ever been in there. First time for everything I guess.
    Hopefully, you have the service manual; just follow the steps, from the beginning, and you should be fine.
    "You can't trust your eyes, if your mind is out of focus" --

  6. #6
    The Wolf 2,500+ Posts mojorolla's Avatar
    Join Date
    Jan 2010
    Location
    Cleveland OH
    Posts
    2,511
    Rep Power
    125

    Re: MX-M354N

    According to the 22-6 tray 1 has almost 1/4 million clicks on the rolls. Verify that it happens from all trays before messing with optics. Make sure you are printing and copying from the same tray when trouble shooting. That is A LOT of skew for an optical issue usually.
    Check feed rolls and paper path as the paper is already skewed when the image is applied.


    Failing to plan is planning to fail!!!

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here