Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 8 of 8
  1. #1
    Senior Tech 250+ Posts
    Join Date
    Feb 2014
    Location
    Bristol
    Posts
    456
    Rep Power
    26

    MX2310 no control panel on switch on

    Hi all,

    I have a MX2310 which when you switch on the scanner does its jiggle and the fans come on but the ops panel doesnt light up and the machine just sits there with the fans running doing nothing. I have cleaned the DIMM's on the print board. disconnected the HDD, but it's still the same. Could it SD Card related?? Any ideas welcome?

  2. #2
    Senior Tech 100+ Posts
    MX2310 no control panel on switch on


    Join Date
    Jul 2016
    Posts
    127
    Rep Power
    17

    Re: MX2310 no control panel on switch on

    Try re-seating and / or replacing the MFP board.
    When I started servicing copiers they used toaster ovens for fusers.....I'm old

  3. #3
    Field Supervisor 500+ Posts
    MX2310 no control panel on switch on

    mansart's Avatar
    Join Date
    Apr 2009
    Posts
    843
    Rep Power
    54

    Re: MX2310 no control panel on switch on

    I would initially lean towards SD card......

    Using DIP switch on MFP board, put machine into EM Firmware...... if emergency firmware screen comes up, can't hurt to do firmware at that point, you may get lucky. If machine takes firmware then still refused to boot in normal mode, I would do SD card

  4. #4
    Senior Tech 250+ Posts driving lots of miles's Avatar
    Join Date
    Jun 2016
    Location
    Kansas
    Posts
    362
    Rep Power
    22

    Re: MX2310 no control panel on switch on

    I would also lean toward the SD card, when the screen is blank or says waiting. We have had too many of the SD card issues lately.

  5. #5
    Field Supervisor 500+ Posts
    MX2310 no control panel on switch on

    mansart's Avatar
    Join Date
    Apr 2009
    Posts
    843
    Rep Power
    54

    Re: MX2310 no control panel on switch on

    At this point, so many SD failures, any machine that is more that 30min drive time...... when new and being set up I'm cloning the SD card with HDD Raw Copy Tool
    Make a duplicate with clone file and mounting inside machine.

  6. #6
    Technician
    Join Date
    Feb 2014
    Location
    colchester
    Posts
    16
    Rep Power
    0

    Re: MX2310 no control panel on switch on

    I agree could well be SD card but always check the RAM sticks are seated correctly,on the printer PWB,it takes no more than 5 minutes to check.

  7. #7
    Senior Tech 100+ Posts
    MX2310 no control panel on switch on

    moose55's Avatar
    Join Date
    Mar 2017
    Location
    Papillion, NE
    Posts
    143
    Rep Power
    16

    Re: MX2310 no control panel on switch on

    I have had to reseat the mother PWB for this issue also. It would be a quick attempt before doing the SD card.
    The Moose is loose!!

  8. #8
    Technician
    Join Date
    Feb 2013
    Posts
    36
    Rep Power
    0

    Re: MX2310 no control panel on switch on

    Guaranteed it will be the sd card. Absolutely useless these machines. Have constant problems with the sd card in the mx 2314 machines. Terrible not to have a hdd

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here