Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6
  1. #1
    Senior Tech 250+ Posts
    MX4141N TouchScrees Black, green LED Flashing on Op Panel


    Join Date
    Aug 2013
    Posts
    279
    Rep Power
    27

    MX4141N TouchScreen Black, green LED Flashing on Op Panel

    Normally the green LED will light solid and stop blinking when power is turned on, but the green LED on the control panel keep flashing (forever), the touchscreen stays dark, and the fans are running.

    I replaced MFPC (including the little piggy back PCB with the memory and firmware, these are only on the 4141/5141 models) , HDD, and op panel.

    Any help on this would be awesome!

    Seen similar posts with same problem but different model, so sorry if this is a repeat.
    Last edited by buzz; 10-04-2017 at 11:26 PM.

  2. #2
    Trusted Tech 50+ Posts
    Join Date
    Aug 2017
    Location
    Johannesburg,Gauteng
    Posts
    64
    Rep Power
    14

    Re: MX4141N TouchScrees Black, green LED Flashing on Op Panel

    HI have you tried replacing the sd card as sometimes sd card get corrupted can cause the fault as the machine boots from the sd card.

  3. #3
    Senior Tech 100+ Posts
    MX4141N TouchScrees Black, green LED Flashing on Op Panel

    moose55's Avatar
    Join Date
    Mar 2017
    Location
    Papillion, NE
    Posts
    143
    Rep Power
    16

    Re: MX4141N TouchScrees Black, green LED Flashing on Op Panel

    Try reseating the mother PWB first. It is an easy attempt. I have had their connection to the MFP PWB and PCU PWB become somewhat flakey sometimes. If that doesn't do it, then yeah, it's your SD card.
    The Moose is loose!!

  4. #4
    Technician
    Join Date
    Nov 2009
    Location
    CPH
    Posts
    14
    Rep Power
    30

    Re: MX4141N TouchScreen Black, green LED Flashing on Op Panel

    Quote Originally Posted by buzz View Post
    Normally the green LED will light solid and stop blinking when power is turned on, but the green LED on the control panel keep flashing (forever), the touchscreen stays dark, and the fans are running.

    I replaced MFPC (including the little piggy back PCB with the memory and firmware, these are only on the 4141/5141 models) , HDD, and op panel.

    Any help on this would be awesome!

    Seen similar posts with same problem but different model, so sorry if this is a repeat.
    if you replace the sd card and reconnecet the controller dosent work. Replace the PSU.
    Nothing is impossible for them who should not do it.

  5. #5
    Senior Tech 250+ Posts
    MX4141N TouchScrees Black, green LED Flashing on Op Panel


    Join Date
    Aug 2013
    Posts
    279
    Rep Power
    27

    Re: MX4141N TouchScrees Black, green LED Flashing on Op Panel

    Thank you all!
    SD was it!
    Touchscreen comes on and machine comes to ready state, but now there's no drive to the registration motor.
    Troubleshooting now.
    Last edited by buzz; 10-11-2017 at 07:34 PM.

  6. #6
    Senior Tech 100+ Posts
    MX4141N TouchScrees Black, green LED Flashing on Op Panel

    moose55's Avatar
    Join Date
    Mar 2017
    Location
    Papillion, NE
    Posts
    143
    Rep Power
    16

    Re: MX4141N TouchScrees Black, green LED Flashing on Op Panel

    Quote Originally Posted by buzz View Post
    Thank you all!
    SD was it!
    Touchscreen comes on and machine comes to ready state, but now there's no drive to the registration motor.
    Troubleshooting now.
    Try a COMPLETE firmware rewrite.
    The Moose is loose!!

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here