Hi,
I have problem with MX-3100n. When the main power swich turn on, only the geen led on control panel is on,everythin else is dead. I replace the power board but no resoults.
Any suggestion??
Hi,
I have problem with MX-3100n. When the main power swich turn on, only the geen led on control panel is on,everythin else is dead. I replace the power board but no resoults.
Any suggestion??
Most likely the SD card or the program ROM. I would replace the SD card first.
Good luck
Bil
Take out the network-board ( 2 screws) at right rear side. Maybe a contact problem. Take it out, clean contact & build in.
We have this error after transport
Good luck
Items #22 & 23 on page 72-1 of the parts manual are your program ROMs used in place of an SD card.
The Moose is loose!!
Bookmarks