SHARP MX-3100N

[ivanusicnm@gmail.com]

Hi,

I have problem with MX-3100n. When the main power swich turn on, only the geen led on control panel is on,everythin else is dead. I replace the power board but no resoults.

Any suggestion??

[bilyahn]

Most likely the SD card or the program ROM. I would replace the SD card first.

Good luck

Bil

[ivanusicnm@gmail.com]

Most likely the SD card or the program ROM. I would replace the SD card first.

Good luck

Bil

this model has no sd card

Ivan

[OlliK1969]

Take out the network-board ( 2 screws) at right rear side. Maybe a contact problem. Take it out, clean contact & build in.
We have this error after transport
Good luck

[moose55]

Items #22 & 23 on page 72-1 of the parts manual are your program ROMs used in place of an SD card.