Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: Simulation 88

  1. #1
    Expert 50+ Posts Raoufselwaness's Avatar
    Join Date
    Nov 2008
    Location
    cairo
    Posts
    74
    Rep Power
    32

    Simulation 88

    Hi dear all;
    can any one tell me the differences in sim-88
    i got a sharp mx-7001n with color problems and the last tech change almost every thing!
    i want to reset the m/c to factory defaults;
    what precautions should i use if any

    thanks in advance

    Raouf

  2. #2
    Service Manager 1,000+ Posts bilyahn's Avatar
    Join Date
    Dec 2006
    Location
    Quincy, CA
    Posts
    1,432
    Rep Power
    54

    Re: Simulation 88

    I would not recommend using sim 88 for this. You would just be looking for trouble. If the tech went through and changed a lot of settings then there is very little you can do that would be quick and easy. May have to go through and check service manual settings with what you currently have to get it back to default. There are some other things you can do like a HDD format and memory clears but if the tech changed anything within simulations there is not a sure fire way to reset these other than to follow the SM settings.

    Good luck with this.

    Bil

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here