Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6
  1. #1
    Trusted Tech 50+ Posts
    mx-6240 secondary belt ripping mx-620b2


    Join Date
    Aug 2011
    Location
    Milford,ohio
    Posts
    76
    Rep Power
    26

    mx-6240 secondary belt ripping mx-620b2

    Anyone else having a issue with secondary belt ripping on the 6240 shortly after a pm? Happens in the 30-50k range after being replaced with new blade, I've tried yellow toner, white starting power, using nothing, still happens, I'm stumped. I've done a ton of pm's too on this model, doesn't happen on all of them after pm, just enough to drive me nuts, have around 20 assigned to me. (my home away from home)

  2. #2
    Senior Tech 250+ Posts
    Join Date
    Jun 2016
    Posts
    456
    Rep Power
    23

    Re: mx-6240 secondary belt ripping mx-620b2

    Same problem here, no idea how to fix it though...

    Even tried a brand new sec transfer unit: same problem.

  3. #3
    Senior Tech 100+ Posts
    mx-6240 secondary belt ripping mx-620b2

    moose55's Avatar
    Join Date
    Mar 2017
    Location
    Papillion, NE
    Posts
    143
    Rep Power
    16

    Re: mx-6240 secondary belt ripping mx-620b2

    Just a thought, but you may try removing the sep finger from the primary transfer assembly?
    The Moose is loose!!

  4. #4
    Senior Tech 250+ Posts
    Join Date
    Jun 2016
    Posts
    456
    Rep Power
    23

    Re: mx-6240 secondary belt ripping mx-620b2

    There alwast is a lot of toner buildup if you remove the fuser, right below the fuser on the metal plate.

    Now i'm cleaning this every maintenance...and all the guides in the paperpath, because there is a lot of toner buildup on these too...maybe a piece that breaks off and rips the B2? I dont know.

    I'm just trying this also, so dont know if this is the solution yet

  5. #5
    Trusted Tech 50+ Posts r3d343420's Avatar
    Join Date
    Aug 2012
    Location
    Berthoud, CO
    Posts
    55
    Rep Power
    24

    Re: mx-6240 secondary belt ripping mx-620b2

    I also have this happen to me just enough to drive me nuts. less often, i also have had the primary belt rip on occasion with no visible cause as to why. I have called Sharp support on the issue in the past and they did not have an answer. makes me feel better that i am not the only one.

  6. #6
    Senior Tech 100+ Posts
    Join Date
    Jun 2011
    Posts
    148
    Rep Power
    28

    Re: mx-6240 secondary belt ripping mx-620b2

    Remove these 2x springs from the primary transfer unit. They push the brake onto the ends of the roller, and are very tight, and can cause the roller under the belt to stall which also drives the cleaner box for the primary transfer, there is no direct drive to this cleaner box, it gets its drive via the belt rotation. This in turn causes the cleaner box to stall, and then either the blade to flip, the primary belt to tear or the 2nd transfer to tear due to poor lubrication

    Capture.JPG

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here