Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6
  1. #1
    Junior Member
    Join Date
    Oct 2017
    Location
    Sheffield
    Posts
    3
    Rep Power
    0

    Angry MX6500 (FN22) FINISHER

    Intermittently Jams while doing booklets, when i say jams the booklet is printed and stapled but then everything just stops just before its about to fold and exit.


  2. #2
    The Wolf 1,000+ Posts mojorolla's Avatar
    Join Date
    Jan 2010
    Location
    C-town
    Posts
    1,639
    Rep Power
    48

    Re: MX6500 (FN22) FINISHER

    How about an error code or more information?
    My Spider Service Senses do not work over the internet.....




    Failing to plan is planning to fail!!!

  3. #3
    Junior Member
    Join Date
    Oct 2017
    Location
    Sheffield
    Posts
    3
    Rep Power
    0

    Re: MX6500 (FN22) FINISHER

    apologies I was busy firing up the crystal ball for a customer.

    FSS203_N & FSM205.

    firmware up to date.
    Boards tested,
    Motors tested,
    sensors tested.
    swapped out the stacker unit inside.

    it jams sometimes after 20 booklets or 200 booklets and we have mondi 100gsm paper.
    there is a mod out for one of the sensors which has a wider range so it doersnt jam due to paper dust but as i said we have the best paper. (very little paper dust in the m/c)


  4. #4
    Junior Member
    Join Date
    May 2017
    Posts
    3
    Rep Power
    0

    Re: MX6500 (FN22) FINISHER

    If everything else works it might not be a bad idea to install the new sensor anyways and see how things go. Sharps makes the modes for a reason and sometimes even a little bit of paper dust can cause serious issues with sensors.


  5. #5
    The Wolf 1,000+ Posts mojorolla's Avatar
    Join Date
    Jan 2010
    Location
    C-town
    Posts
    1,639
    Rep Power
    48

    Re: MX6500 (FN22) FINISHER

    One thing about Sharp sensors...they suck. If you have not installed the updated sensor, I would highly recommend it as Sharp will adjust firmware to match updated components.
    Most of my issues with this finisher are with the UPPER stapler but 2 saddle stitch issues I've had come to mind.
    1. Code you list is a push unit jam. I have seen the springs on one side lose tension. However, this created a crooked booklet.
    2. Had one where the 2 folding rollers formed a groove on the lower roller where paper was hitting. This one jammed at exit with that code you have.
    Please keep us posted.




    Failing to plan is planning to fail!!!

  6. #6
    Junior Member
    Join Date
    Apr 2017
    Posts
    1
    Rep Power
    0

    Re: MX6500 (FN22) FINISHER

    Quote Originally Posted by ICEuk View Post
    Intermittently Jams while doing booklets, when i say jams the booklet is printed and stapled but then everything just stops just before its about to fold and exit.

    Replace sensor as per TB MFP-TB-1149 (Modification for False Photosensor Unit Detection)


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here