Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6

Thread: ppd2_fin jams

  1. #1
    Technician
    Join Date
    Jul 2011
    Location
    Hays, Kansas
    Posts
    23
    Rep Power
    0

    ppd2_fin jams

    Have a Sharp MX-5141 with an MX-FN10 attached to it. At times this jam comes up and will continue to jam the same way till the machine is turned off with the main power switch. There will be a paper just below the PS roller without the buckle and one in the ADU unit. The papers are fed in and the machine fans run for about 30 seconds then it jams. The jam history shows PPD2_fin. It says it is (Finisher Communication Abnormality Detection). Has anyone ever seen this and if so lead me in the right direction.. Thanks Ron


  2. #2
    Senior Tech 100+ Posts
    Join Date
    Aug 2009
    Location
    Newry
    Posts
    188
    Rep Power
    18

    Re: ppd2_fin jams

    There is a finisher firmware related to the jam code


  3. #3
    Trusted Tech 50+ Posts
    Join Date
    Oct 2014
    Location
    salisbury
    Posts
    53
    Rep Power
    7

    Re: ppd2_fin jams

    Quote Originally Posted by sharphead View Post
    There is a finisher firmware related to the jam code
    I have seen some strange problems with the inner pass unit sensors. PDPPD1 and PDPPD2 sensors throwing this trouble code
    Part number 0CWE314000784. Might be your problem.


  4. #4
    Senior Tech 100+ Posts
    Join Date
    Dec 2009
    Posts
    162
    Rep Power
    18

    Re: ppd2_fin jams

    I had this problem recently and my issue was also in the paper pass unit. The solenoid that controls the gate on the entrance side was sticking. The foam bumper noise reducer was degrading causing the gate to stick. once it freed up it would work fine till machine sat sor a few minutes. You could remove the foam bumper or put a small strip of paper in front of it. That fixed my problem


  5. #5
    Senior Tech 100+ Posts
    ppd2_fin jams


    Join Date
    Mar 2009
    Posts
    113
    Rep Power
    19

    Re: ppd2_fin jams

    Quote Originally Posted by Hansen88 View Post
    I had this problem recently and my issue was also in the paper pass unit. The solenoid that controls the gate on the entrance side was sticking. The foam bumper noise reducer was degrading causing the gate to stick. once it freed up it would work fine till machine sat sor a few minutes. You could remove the foam bumper or put a small strip of paper in front of it. That fixed my problem
    Yep, just about anytime I hear/see issues like this I also look for the closest solenoid


  6. #6
    Technician
    Join Date
    Jul 2017
    Posts
    16
    Rep Power
    1

    Re: ppd2_fin jams

    Quote Originally Posted by Hansen88 View Post
    I had this problem recently and my issue was also in the paper pass unit. The solenoid that controls the gate on the entrance side was sticking. The foam bumper noise reducer was degrading causing the gate to stick. once it freed up it would work fine till machine sat sor a few minutes. You could remove the foam bumper or put a small strip of paper in front of it. That fixed my problem
    Do you have the parts manual page # & item number of the offending solenoid? I believe this an answer to some of the biggest pains in my a$$.
    Thanks in advance!!!!!!


    Sent from my iPhone using Tapatalk


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here