Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Junior Member
    Join Date
    Mar 2013
    Location
    Sierra Vista, AZ
    Posts
    2
    Rep Power
    0

    MXFN24 Random F1-15 error code

    We have a MXM904 with MXFN24 Finisher having random error code F1-15.Might work great for for a couple days then have a code for days. Any help or ideas would be great. Close to 4Mil on the machine.

  2. #2
    Trusted Tech 50+ Posts
    MXFN24 Random F1-15 error code


    Join Date
    Oct 2016
    Location
    Grand Island, NE
    Posts
    81
    Rep Power
    16

    Re: MXFN24 Random F1-15 error code

    Make sure the exit trays are free to move up and down without any resistance on the finisher. They move on to the sensors and make sure they are working correctly, they are fairly cheap, and with that many pages, it's not a bad idea to just replace them. Lastly, it could be the motor getting weak. It's not as common with these finishers as it was with the inner finisher, but when the lift motor starts to go bad, it will lift just slightly slower than normal, so it doesn't reach the sensors in time, so the machine throws a code. But, as I said, sensors are cheap, and they are known to be intermittent for a long time before they go out completely.

    Hope this helps! Good luck!

  3. #3
    The Wolf 2,500+ Posts mojorolla's Avatar
    Join Date
    Jan 2010
    Location
    Cleveland OH
    Posts
    2,512
    Rep Power
    125

    Re: MXFN24 Random F1-15 error code

    Go into SIM 3-2 and see if FCCD is highlighted. Switch should not be on in normal conditions.


    Failing to plan is planning to fail!!!

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here