Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 2 of 2 FirstFirst 12
Results 11 to 13 of 13

Thread: MX5141 E7-11

  1. #11
    The Wolf 1,000+ Posts mojorolla's Avatar
    Join Date
    Jan 2010
    Rep Power

    Re: MX5141 E7-11

    Unplug the doc feeder and see if you get the error. If not, the CIS unit (CCD) inside the DSPF is most likely bad. Machine will operate in all other ways beside the doc feeder......

    Failing to plan is planning to fail!!!

  2. #12
    Trusted Tech 50+ Posts
    Join Date
    Feb 2009
    Fort Walton Beach, Florida
    Rep Power

    Re: MX5141 E7-11

    Did you ever find a fix on this. We have one that throws the E7-11. It prints and faxes fine, but will shoot black copies through the DF and off the glass. Tech is currently going through changing the scanner control board and the CCD, but don't know the results of that yet.
    Thanks for any help.


  3. #13
    Trusted Tech 50+ Posts
    Join Date
    Jan 2012
    Rep Power

    Re: MX5141 E7-11

    It turns out the CCD unit we got was bad. We ordered another CCD unit and installed it. Works great,

    also we had to adjust optical cables etc.. and tweak a lot to get the image back into alignment. after replacing the CCD, so expect some issue with the alignment being off a little after replacement.

Tags for this Thread


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Get the Android App
click or scan for the Copytechnet Mobile App


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here