Dislikes:
0
-
MX-3570 duplex
So....has anyone experienced an MX-3570 that won't do 2sided-2sided, or 2sided-1sided through the ADF? Brand new install, and if you try doing 2 sided original it will scan it, then ask for you to put 1 original back into the ADF. I have tried doing an "end of lease" (basically restoring factory defaults), and doing a complete firmware rewrite with no luck. Thinking it may all be in the scan logic in the ADF, and I will probably swap out ADF's, but just thought I would throw it out to see if anyone has experienced this one yet?
-
Re: MX-3570 duplex
The 50 and 70 series both have weird setting layouts, but the search bar is fairly useful. Anything conflicting in the settings? (assuming you didn't already check that route since you stated that you did an end of lease)
-
Re: MX-3570 duplex
Turns out that I had a bad connector from ADF that plugged into MFPSCU PWB.
-
Re: MX-3570 duplex
Well, thats awkward. I'm beginning to think the 70 series isn't so advanced after all.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks