Page 2 of 2 FirstFirst 12
Results 11 to 17 of 17

Thread: Sharp mx-m264

  1. #11
    Technician
    Join Date
    Apr 2015
    Location
    wakefield
    Posts
    49
    Rep Power
    7

    Re: Sharp mx-m264

    Quote Originally Posted by davebtech View Post
    Thanks a lot for this you are spot on.This is the strangest paper switch and lcd message Iíve seen in a long time.
    Does anyone have latest firmware update file for this Sharp mxm 264n? Thanks Dave


  2. #12
    Trusted Tech 50+ Posts moose55's Avatar
    Join Date
    Mar 2017
    Location
    Papillion, NE
    Posts
    93
    Rep Power
    3

    Re: Sharp mx-m264

    Quote Originally Posted by davebtech View Post
    Sharp mxm264 has ( remove paper from center tray) on display never scene this before,no paper there,no finisher,no Jams in dilivery unit, or fuser. replaced paper sensor above laser unit in dilivery tray(center belly of machine) replaced paper sensor in dilivery unit.This thing wonít go away. Anyone see this before? Thanks for any input ,Dave
    Go to SIM 30-1. TFD1, 2 or 3 should show you which sensor is detecting paper full state.

    The Moose is loose!!

  3. #13
    Technician
    Join Date
    Apr 2015
    Location
    wakefield
    Posts
    49
    Rep Power
    7

    Re: Sharp mx-m264

    Quote Originally Posted by moose55 View Post
    Go to SIM 30-1. TFD1, 2 or 3 should show you which sensor is detecting paper full state.
    Thanks but been there done that need to try firmware if anyone has?


  4. #14
    Senior Tech 100+ Posts
    Sharp mx-m264

    Ratchet2501's Avatar
    Join Date
    Mar 2017
    Location
    Vernal, Utah
    Posts
    206
    Rep Power
    5

    Re: Sharp mx-m264

    Apologies, I didn't even think to attach a diagram. *facedesk*


  5. #15
    Technician
    Join Date
    Apr 2015
    Location
    wakefield
    Posts
    49
    Rep Power
    7

    Re: Sharp mx-m264

    Quote Originally Posted by Ratchet2501 View Post
    Apologies, I didn't even think to attach a diagram. *facedesk*
    In sim 30-1 switch 1 should not be highlighted mine is on.in a working machine in that sim if you put 1 piece of paper over switch it gets highlighted.take out 1 piece of paper highlight goes out.What is so confusing is that when you make copy from working machine it never says remove paper from center tray.If you make over 500 copies which nobody ever does machine clicks tells you to remove paper from center tray not the sensor.this center tray switch 3 wires goes back to pcu pwb .Have board ordered.just when you think youíve seen everything.......what a headache.


  6. #16
    Senior Tech 100+ Posts
    Sharp mx-m264

    Ratchet2501's Avatar
    Join Date
    Mar 2017
    Location
    Vernal, Utah
    Posts
    206
    Rep Power
    5

    Re: Sharp mx-m264

    Quote Originally Posted by davebtech View Post
    In sim 30-1 switch 1 should not be highlighted mine is on.in a working machine in that sim if you put 1 piece of paper over switch it gets highlighted.take out 1 piece of paper highlight goes out.What is so confusing is that when you make copy from working machine it never says remove paper from center tray.If you make over 500 copies which nobody ever does machine clicks tells you to remove paper from center tray not the sensor.this center tray switch 3 wires goes back to pcu pwb .Have board ordered.just when you think youíve seen everything.......what a headache.


    This is the sensor I'm talking about, those stupid gray plastic parts fall off and then you get the "center tray" crap. My opinion it should be called something different *shrugs*


  7. #17
    Technician
    Join Date
    Apr 2015
    Location
    wakefield
    Posts
    49
    Rep Power
    7

    Re: Sharp mx-m264

    Quote Originally Posted by Ratchet2501 View Post


    This is the sensor I'm talking about, those stupid gray plastic parts fall off and then you get the "center tray" crap. My opinion it should be called something different *shrugs*
    I here ya! But this paper switch is different.........itís the beast.......


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here