This new line of mfp's has replaced the sdcard from the older models with a msata card but these seem to be just as unreliable as the sdcards. E7-80 errors, which the manual recommends fixing by replacing the scn-mfp board, can usually be fixed by just replacing the msata card.
It seems that problems that were caused by bad sdcards will now be caused by bad msata cards.
Save yourself a bundle.....download HDD Raw Copy Tool and a USB to IDE/SATA Adapter and copy data from SATA card from new or working machine. Then when you have a bad one just re write the image......it's not the SD card or SATA card that's bad its the software written to them.
New firmware v6.51 or higher
Does the msata card fit in a sata connector?Originally Posted by mansart
No you need a USB to IDE SATA adapter
https://www.amazon.com/StarTech-USB-...h+sata+adapter
As suggested in an earlier post, update the firmware. One version was specific for curing E7-80 and E7-90 errors....
Failing to plan is planning to fail!!!
Hi there
This links to an adapter I already have, for 2.5" and 3.5" HDD's, this won't work for the Msata cards in question.
Has anyone found a suitable adapter to do the job? I've googled around, but struggling to find one at the mo
Thanks
Tony
This is the one I use
ORICO mSATA Hard Drive Enclosure
Sorry about incorrect link..... tonasis is correct
No problem Mansart!
Thanks: 
Likes: 
Dislikes: 
Reply With Quote
Bookmarks