Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5
  1. #1
    Senior Tech 250+ Posts
    sharp mx 5070n keeps rebooting...

    n25an's Avatar
    Join Date
    Jul 2008
    Location
    miami, florida
    Posts
    475
    Rep Power
    24

    sharp mx 5070n keeps rebooting...

    ok...


    I arrived at the site... plugged in the copier... and it gets to the sharp screen... then it reboots...

    unable to install firmware... it keeps rebooting...
    disconnected fax and network cables...
    I disconnected the fax board and the adf...
    it made no difference...
    I changed the ac pwb... no difference...
    I disconnected the hard drive...
    no difference...

    I am looking into replacing the dc power supply, then the ac monitor pwb, then the hv pwb...

    I am checking if this is the right order or if there is a better way...

    the service manual confuses me...

    any guidance to this knuckle dragger screw turner would be helpful...

    Sad To Say I Don't Have a Life
    I do this stuff on the weekends too

  2. #2
    Senior Tech 250+ Posts
    sharp mx 5070n keeps rebooting...

    mansart's Avatar
    Join Date
    Apr 2009
    Posts
    268
    Rep Power
    22

    Re: sharp mx 5070n keeps rebooting...

    Replace the SATA card, or if you have the ability simply reimage the SATA card


  3. #3
    Sharp & HP Tech 100+ Posts austonrush's Avatar
    Join Date
    Jan 2010
    Location
    Guelph
    Posts
    185
    Rep Power
    18

    Re: sharp mx 5070n keeps rebooting...

    I'd replace the SATA Card with a new one and re-image it. The ones used by sharp fail all the time.

    Good Luck


  4. #4
    Senior Tech 250+ Posts
    sharp mx 5070n keeps rebooting...

    n25an's Avatar
    Join Date
    Jul 2008
    Location
    miami, florida
    Posts
    475
    Rep Power
    24

    Re: sharp mx 5070n keeps rebooting...

    parts manual

    are you talking about the part number 26 in the image on page 169 of parts manual
    and the part number is listed in the msata matrix on page 167 of parts manual

    handy guide

    I was looking at the handy guide... are you referring to whats on the troubleshooting procedures on page 68...

    and concerning replacing the msata...

    in the handy guide on page 50 should I just skip down to step 2 and install the new msata...

    meaning does it come with a minimum level firmware installed...

    and then once I am done use the firmware setup procedure on page 35

    am I on target???

    one more question...

    what do I need to do to reimage msata outside of the copier...??? what do I need...???

    Sad To Say I Don't Have a Life
    I do this stuff on the weekends too

  5. #5
    Senior Tech 250+ Posts
    sharp mx 5070n keeps rebooting...

    n25an's Avatar
    Join Date
    Jul 2008
    Location
    miami, florida
    Posts
    475
    Rep Power
    24

    Re: sharp mx 5070n keeps rebooting...

    did a quick search in the forum...
    found a couple things now that I know its related to msata
    interesting
    msata sharp forum search

    Sad To Say I Don't Have a Life
    I do this stuff on the weekends too

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here