Results 1 to 4 of 4
  1. #1
    Field Supervisor 500+ Posts
    Extended Test Commands

    Lawrence's Avatar
    Join Date
    May 2009
    Location
    NS
    Posts
    679
    Rep Power
    42

    Extended Test Commands

    Howdy folks,

    Has any body heard if we can get into extended test commands on any of the new product that requires the home button to be double tapped?

    We get stupid low humidity here in winter and on my old MXM453's we would get background. I would go into sim 80-2 and tweak the VO voltage to trick the machine into adding less toner.

    I have 3 MXM654's that are at 300k - 400k and they have overtoned and ive had to replace the DV. I tried using DV aging, running sky shots and got rid of the background and then recalibrated with 46-74 but the overtoned state came back within a week.

    I keep pushing Sharp for extended test commands but they keep claiming they don't know.
    Evil will always triumph because good is dumb.
    Its all shits and giggles until some body giggles and shits...

  2. #2
    Senior Tech 100+ Posts
    Join Date
    Jun 2011
    Posts
    148
    Rep Power
    28

    Re: Extended Test Commands

    Run sky shots, then re-run 25-02 to set the lower ratio as a reference. 46-74 will only adjust the voltages to try and get the print to its factory set value but will not adjust the TD ratio

  3. #3
    Senior Tech 100+ Posts
    Extended Test Commands


    Join Date
    Jan 2008
    Location
    Schenectady, NY
    Posts
    126
    Rep Power
    34

    Re: Extended Test Commands

    As far as Sharp USA is concerned they no longer exist. Japan has not released them to anyone.

  4. #4
    Field Supervisor 500+ Posts
    Extended Test Commands

    Lawrence's Avatar
    Join Date
    May 2009
    Location
    NS
    Posts
    679
    Rep Power
    42

    Re: Extended Test Commands

    Quote Originally Posted by chubblies View Post
    Run sky shots, then re-run 25-02 to set the lower ratio as a reference. 46-74 will only adjust the voltages to try and get the print to its factory set value but will not adjust the TD ratio
    Ive always been told thats a big no no but at this point i guess we have nothing to really loose and should do the same thing. Will give it a go next time.
    Evil will always triumph because good is dumb.
    Its all shits and giggles until some body giggles and shits...

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here