Thanks: 
Likes: 
Dislikes: sounds like the power supply for the main coronas is bad. Don't know how to check it.
sounds like the power supply for the main coronas is bad. Don't know how to check it.
Inside the processing unit it rest above the drumOriginally Posted by clark
Sent from my SM-G930V using Tapatalk
On top on the drums in the transfer unit. The power supply will be in the back of the machine in about the middle of the machine.
Ok, thanks.oops I commented on the wrong model. Sorry about that.
Sent from my SM-G930V using Tapatalk
You say there's no toner on the drums? Sounds to me like your shutter solenoid is not opening. How did you test to see if the shutters open all the way? Remove the black shutter temporarily and see if you get image.
i didnt say that there is no toner.. toners is new and Genuine, all of them... i will check about that shutter test when we got there today.
Every day of life is a learning process... Just make sure you are open in all aspects of comments.
Thanks.. it was the shutter.. in someway it is stuck and not opening.
Sent from my HUAWEI VNS-L21 using Tapatalk
Every day of life is a learning process... Just make sure you are open in all aspects of comments.
There is a solenoid that opens the shutters. That solenoid is probably bad. You can test it with Sim 6-1, LSUSS.
Yep checked that one... And its all good now. Thank you again.
Sent from my HUAWEI VNS-L21 using Tapatalk
Every day of life is a learning process... Just make sure you are open in all aspects of comments.
You're welcome!
Reply With Quote
Bookmarks