hello
I have an mx453 when I turn it on , it shows me that it need to upgrade . how can i get the firmware . I checked sharp website but it doesnt have that . please help me .
hello
I have an mx453 when I turn it on , it shows me that it need to upgrade . how can i get the firmware . I checked sharp website but it doesnt have that . please help me .
I have never had a Sharp tell me that it needed firmware updated? If you look at what firmware version is on it< then you can determine if firmware needs upgraded. MX-M453N firmware is readily available on the Sharp-IDNC website.
The Moose is loose!!
Never seen a Sharp Machine say "Needs Firmware Upgrade". Pictures would be nice.
One more thing, some machines have a Data Security Kit installed in the machine. You need to make sure you update the DSK if it has it. If it doesn't, then the normal firmware for the machine. Find out if it has a DSK first.
It doesn't tell me that need firmware update . when I turn it on it doesnot boot . like the picture below .WhatsApp Image 2018-01-31 at 10.05.59.jpg
It doesn't tell me that need firmware update . when I turn it on it doesnot boot . like the picture below .WhatsApp Image 2018-01-31 at 10.05.59.jpg
hey there
these message is , you have switched a little switch on the controller . the name of the switch is "update on/off"
switch it to off . then reboot the machine .
if it is the same , look for a missing componet on the board .
Flash-rom (named jup3 boot or main ) there are two of these
memorycard
it is also possilble , that the machine have lost the firmware . then you need the right on .
dsk
normal
or dsk spezial ( then it is not possible to reflash the firmware, in this case you have to replace the Flashroms)
michmich
Bookmarks