We tried the humidity sensor with no luck.
Just received the countermeasure shielding and will try that asap. Question though. Should we look into replacing the imagine density sensor, or a good cleaning is ok? Also would it be advised to replace the DV as this error has been ongoing and could have effected "the mix"?
I have a MX-M465N that we're fighting this code on. We've replaced the supplies, Cleaning web & entire transfer unit that has the new sensor in it. Also have updated firmware that addressed the code when coming out of sleep mode. Any other things that you've fixed it with ? Is the temp/humidity related to this code ? We have not tried that. Thanks for any input !
you can also check in 44-09 if the values are good.
If not clean the transfert roller with dry cloth , the sensor & do a 46-74 again.
Thank you, Gents !
Bookmarks