Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 7 of 7
  1. #1
    Senior Tech 250+ Posts oeshuron's Avatar
    Join Date
    May 2008
    Posts
    259
    Rep Power
    35

    MX-M453N - CQ Issue - Background Area

    Issue of background area on internal prints and copies. Have tried different drum, drum frame, main charge, transfer unit, replaced dv. Any ideas based on sample attached?
    Attached Images Attached Images

  2. #2
    Service Manager 1,000+ Posts
    MX-M453N - CQ Issue - Background Area

    copiertec's Avatar
    Join Date
    Jan 2016
    Location
    Centereach, L.I. New York
    Posts
    2,161
    Rep Power
    101

    Re: MX-M453N - CQ Issue - Background Area

    I'm assuming you have checked A/C wall voltage? Have you swapped developing unit?

  3. #3
    Senior Tech 100+ Posts
    MX-M453N - CQ Issue - Background Area

    Ratchet2501's Avatar
    Join Date
    Mar 2017
    Location
    Vernal, Utah
    Posts
    206
    Rep Power
    17

    Re: MX-M453N - CQ Issue - Background Area

    I'd probably hit the drum with some kynar/zinc stearate. Check it again. Then try the secondary transfer roller section for issues/toner mess. Check the lsu glass for dirt. With most of the monochrome units those in my area at least tend to be troublemakers. Older units I tend to have parts get broken on the process units but the newer ones it tends to be the seals not doing their job. Just my two cents though.

  4. #4
    Senior Tech 100+ Posts Jhonjon's Avatar
    Join Date
    Sep 2013
    Location
    Penang
    Posts
    205
    Rep Power
    24

    Re: MX-M453N - CQ Issue - Background Area

    Quote Originally Posted by oeshuron View Post
    Issue of background area on internal prints and copies. Have tried different drum, drum frame, main charge, transfer unit, replaced dv. Any ideas based on sample attached?
    I usually encountered this problem whenever I extend the life of consumables and reset the maintenance indicator. As you said you replace the DV what is the value of DV calibration? Usually, the value is 100 to 120. did you remove the toner when calibrating? Did you try to jam the machine and check if the drum is covered with toner?

  5. #5
    Field Supervisor 500+ Posts
    MX-M453N - CQ Issue - Background Area


    Join Date
    Dec 2009
    Location
    Waukegan IL
    Posts
    956
    Rep Power
    57

    Re: MX-M453N - CQ Issue - Background Area

    I got overtoning on those models,especially when our company was buying generic toner. You can run copies with the toner cart out and run skyshots til the level comes down to where it looks good then run the 25-02 to lock it in there.

  6. #6
    Senior Tech 250+ Posts oeshuron's Avatar
    Join Date
    May 2008
    Posts
    259
    Rep Power
    35

    Re: MX-M453N - CQ Issue - Background Area

    Ended up doing dv check disable and running sky shots followed up with 25-2 (yes w/toner removed). Machine seems better now. I believe dv was replaced and 25-2 ran with toner installed.

  7. #7
    Senior Tech 250+ Posts oeshuron's Avatar
    Join Date
    May 2008
    Posts
    259
    Rep Power
    35

    Re: MX-M453N - CQ Issue - Background Area

    Ended up doing dv check disable and running sky shots followed up with 25-2 (yes w/toner removed).  Machine seems better now.  I believe dv was replaced and 25-2 ran with toner installed.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here