Page 1 of 2 12 LastLast
Results 1 to 10 of 12
  1. #1
    Field Supervisor 500+ Posts
    AR M620U Jams right at exit rollers


    Join Date
    Jan 2012
    Location
    Tulsa, Oklahoma
    Posts
    932
    Rep Power
    42

    AR M620U Jams right at exit rollers

    This machine jams right at the exit rollers. POD1_N. Exit roller Motor is not turning. Motor is hard to find but should I replace it ? Thinking since it happened at once it is a PWB. I am trying to decide whether to tell customer to buy a new one... What could replace this machine like this Sharp. This is a workhorse...
    Last edited by Doug James; 02-28-2018 at 12:54 AM.

  2. #2
    Field Supervisor 500+ Posts JLSam's Avatar
    Join Date
    Jun 2015
    Location
    Los Angeles
    Posts
    575
    Rep Power
    45

    Re: AR M620U Jams right at exit rollers

    Quote Originally Posted by Doug James View Post
    This machine jams right at the exit rollers. Exit roller Motor is not turning. Motor is hard to find but should I replace it ? Thinking since it happened at once it is a PWB. I am trying to decide whether to tell customer to buy a new one... What could replace this machine like this Sharp. This is a workhorse...
    Are you sure it's the motor and not the paper delivery assembly? I've replaced COUNTLESS of those.

    You're right, that machine is a TANK. If you want to replace with a similar, newer model it would be the MX-M623N.

    The newest would be the MX-M654N.

    Sent from my ONEPLUS A5000 using Tapatalk

  3. #3
    Field Supervisor 500+ Posts
    AR M620U Jams right at exit rollers


    Join Date
    Jan 2012
    Location
    Tulsa, Oklahoma
    Posts
    932
    Rep Power
    42

    Re: AR M620U Jams right at exit rollers

    Quote Originally Posted by JLSam View Post
    Are you sure it's the motor and not the paper delivery assembly? I've replaced COUNTLESS of those.

    You're right, that machine is a TANK. If you want to replace with a similar, newer model it would be the MX-M623N.

    The newest would be the MX-M654N.

    Sent from my ONEPLUS A5000 using Tapatalk
    I took the paper delivery assy out and cheated it and the exit roller motor never turns on from startup of the machine and after hitting start to make a copy. The other motors do...

  4. #4
    Senior member of CRS 2,500+ Posts
    AR M620U Jams right at exit rollers

    ZOOTECH's Avatar
    Join Date
    Jul 2007
    Location
    Insane Diego, CA
    Posts
    3,366
    Rep Power
    102

    Re: AR M620U Jams right at exit rollers

    Quote Originally Posted by Doug James View Post
    I took the paper delivery assy out and cheated it and the exit roller motor never turns on from startup of the machine and after hitting start to make a copy. The other motors do...
    Did you run motor test in simulations? You could also disable jams in Sim 7 (?), and see if it is mechanical, or a sensor problem.
    "You can't trust your eyes, if your mind is out of focus" --

  5. #5
    Master Of The Obvious 10,000+ Posts
    AR M620U Jams right at exit rollers

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,444
    Rep Power
    462

    Re: AR M620U Jams right at exit rollers

    Jam codes?
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  6. #6
    Field Supervisor 500+ Posts
    AR M620U Jams right at exit rollers


    Join Date
    Jan 2012
    Location
    Tulsa, Oklahoma
    Posts
    932
    Rep Power
    42

    Re: AR M620U Jams right at exit rollers

    Quote Originally Posted by blackcat4866 View Post
    Jam codes?
    POD1_N It's doing that everytime. (I'll edit my first post)

  7. #7
    Field Supervisor 500+ Posts JLSam's Avatar
    Join Date
    Jun 2015
    Location
    Los Angeles
    Posts
    575
    Rep Power
    45

    Re: AR M620U Jams right at exit rollers

    So I checked the bulletin boards. It seems this model has had a lot of problems with Pod1_N jams.


    1. MFP-TB-194: Changes to the Fuser Unit to Prevent Toner Spots, POD1_N Jams and L4-03 Error Codes.
    2. MFP-TB- 165: Change to the Upper CL Guide Plate to Prevent POD1_N Jam
    3. MFP-TB-038: Part Change (Section 48 Item 9) to Prevent POD1_N Jamming in the Fuser
    4. MFP-TB-039R: POD1_N jamming in the Process Unit Area
    5. MFP-TB-017: Part Change (Section 48 Item 12) to Prevent POD1_N Jamming due to UpperFuser Separator Pawl Breakage
    6. MFP-TB-007: POD1_N Jam due to Paper Catching on Drum Separation Pawl.


    While I have never experienced any of these problems. Almost always for me it was the Paper Delivery and Fuser.
    I would start with ZooTechs option and use aging to at least find out if the problem is mechanical or electrical. Run Sim 6 without Paper Del and Fuser.

    My two cents: You said you tricked the paper del and the motor was not turning? The two motors that run the exit are POM1 and POM 2 (SM 6-44) They are part of an assembly that also drives the fuser (PM 89-1 #12) If the problem is not Paper Del and Fuser, then replace the fusing drive unit.

    Good Luck Doug.

  8. #8
    Technician
    Join Date
    May 2013
    Posts
    17
    Rep Power
    22

    Re: AR M620U Jams right at exit rollers

    Replace the turnover/transport unit and your problem is solved. Usually the exit lever breaks. You can swap out the lever but you have to remove the unit to do it.

  9. #9
    Field Supervisor 500+ Posts
    AR M620U Jams right at exit rollers


    Join Date
    Jan 2012
    Location
    Tulsa, Oklahoma
    Posts
    932
    Rep Power
    42

    Re: AR M620U Jams right at exit rollers

    Quote Originally Posted by ZOOTECH View Post
    Did you run motor test in simulations? You could also disable jams in Sim 7 (?), and see if it is mechanical, or a sensor problem.
    Big Help thanks so much !!! It is a sensor problem

  10. #10
    Field Supervisor 500+ Posts
    AR M620U Jams right at exit rollers


    Join Date
    Jan 2012
    Location
    Tulsa, Oklahoma
    Posts
    932
    Rep Power
    42

    Re: AR M620U Jams right at exit rollers

    Quote Originally Posted by JLSam View Post
    Are you sure it's the motor and not the paper delivery assembly? I've replaced COUNTLESS of those.

    You're right, that machine is a TANK. If you want to replace with a similar, newer model it would be the MX-M623N.

    The newest would be the MX-M654N.

    Sent from my ONEPLUS A5000 using Tapatalk
    Your right, It's the paper delivery sensors.... Thanks again !!

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here