Dislikes:
0
-
Senior Tech
100+ Posts
- Rep Power
- 17
sharp mx3110n. color registration off
Customer let waste container fill over. cleaned due to everything locked up. But cant get the color to line up together. Tried registration adjustment and machine says no go. gear on transfer unit good. And cleaned all of it and drum units. any ideas please let me know. Thanks
-
Re: sharp mx3110n. color registration off
What do you mean by "machine says no go"? when you do 50-22, what is the result?
-
Senior Tech
100+ Posts
- Rep Power
- 17
Re: sharp mx3110n. color registration off
machine say failure. I tried it 4 times and each time registration failure
-
Re: sharp mx3110n. color registration off
Capture.JPG
These are the possible fail codes......what does the machine really say???
Trying to help...
-
Senior Tech
100+ Posts
- Rep Power
- 17
Re: sharp mx3110n. color registration off
there are no codes on machine. if you copy a driver id the colors are off. even if you print a color image the colors are off. tried to do registration adjustment. it trys but after says
failure.
-
Re: sharp mx3110n. color registration off
You may want to set 50-22 to defaults, then try the auto reg/drum phase again.
The color calibration may have to be started from scratch.
"You can't trust your eyes, if your mind is out of focus" --
-
Technician
- Rep Power
- 22
Re: sharp mx3110n. color registration off
Hey there ,
go into sim 50-20 and look , if it on of the first entries are set to 1 , you have a problem with toner in the DV-boxes .
level of toner is to low . solve these problem .
if you have the problem fixed , set the entries what is 1 to 100 and perform the sim 50-22 again .
michmich
-
Re: sharp mx3110n. color registration off
1.JPG2.JPG
when you do 50-22 are you seeing these screens above?
the actual color registration......is the defect consistent? meaning for example, does the cyan and magenta always "mis-register" by the same distance?
-
Technician
- Rep Power
- 26
Re: sharp mx3110n. color registration off
I would definitely swap out the transfer unit if you have a used one. At least you'll know it's good.
-
Senior Tech
100+ Posts
- Rep Power
- 17
Re: sharp mx3110n. color registration off
thanks for all your help. just went back out there. tried color adjustment. no good. I did notice it was just the magenta off. I know this is strange swap magenta and cyan drums and now everything is great. any thought to why that worked?. thanks
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks