Sharp MX B402sc Fuser part

[guitar9199]

Hey gang,

I'm rebuilding a fuser unit for a 402SC, and I'm having trouble locating a part number. In the parts guide under Fusing Unit 2, I see the number for the lower oil roller, but no number is listed for the cleaning roller for it.

Does anyone know what that might be?

Thanks in advance...

[sharpie]

Its a supply item included with the MX-B42CL

[guitar9199]

Its a supply item included with the MX-B42CL

Thank you... I didn't think this one applied since it has a cleaning web, and the 402sc doesn't use a web.

[JLSam]

Thank you... I didn't think this one applied since it has a cleaning web, and the 402sc doesn't use a web.

B42cl doesn't have web... Just opened one from box. No web, just cleaning rollers and cleaning plate. It's what you need.




Sent from my ONEPLUS A5000 using Tapatalk

[guitar9199]

You RAWK!! Thanks a lot... Hope to return the favor.

[Toner Boy]

For maintenance contracts I'm considering skipping those items and just replacing the upper/lowers. If you replace all items, you may as well buy a new unit - especially considering the labor that goes into it. Lower roller might last longer w/out cleaning roller pressing on it. Will update if fuser wear increases a lot or poor fusing occurs.

[jp74msj55]

For maintenance contracts I'm considering skipping those items and just replacing the upper/lowers. If you replace all items, you may as well buy a new unit - especially considering the labor that goes into it. Lower roller might last longer w/out cleaning roller pressing on it. Will update if fuser wear increases a lot or poor fusing occurs.

Here is kit for heater rollers. MX-B42HK You save about $62 for rebuild kits. Takes me about 35 minutes to rebuild one.