Thanks: 0
Likes: 0
Dislikes: 0
New Machine installed a few months ago.
Total meter : 15K
Error popped up recently twice and cleared by customer by power cycling.
Error cleared on arrival.
Checked CCD flat cable, contacts, and connection.
Ran Sim 01-05 Scanner Check Continuous for all DPI settings and all seems fine with scanner.
Firmware loaded:
ICU MAIN 06.50.K1.00
ICU BIOS 01.02.Z1.00
SCU 05.00.Z1.00
Is there a newer version to firmware?
Any tips, thanks so much!
The firmware is on v7 now, and contains some important fixes and improvements.
But I could not see anything relating to E7-14 mentioned in the release notes.
It's still recommended to update though.
- Knowledge not shared, is eventually knowledge that becomes lost... like tears in the rain.
Fully qualified technician for Ricoh - Canon - Sharp - HP - Brother
E7-14 can be tied back to faulty mSata SSDs.
Cthulhu for president! Why settle for the lesser evil?
Reply With Quote
Bookmarks