Sharp mxm 264n

[davebtech]

Doc feeder jams at slit/scanner glass. Replaced feed/sep tires,cleaned sensors glass never seen this before....anyone run into it? Thanks for any help Dave

[copiertec]

Have you checked the hinges for breakage or alignment such as loose screws?

[Blizzoo]

I know I had a similar jamming issue on a b/w Sharp a long time ago, jamming when original reach the slit glass and a 'Check SPF/RSFP' error if I remember correctly.

The fix was to clean optics/white reference as it looked somehow the scanner won't find his home position for Doc scans, I might be wrong as I don't know your current model.

[Hansen88]

I had one,same feeder but different machine doing that. I replaced the sensors even though they tested to be working. Did not fix. It ended up being the feeder control board.

[davebtech]

I had one,same feeder but different machine doing that. I replaced the sensors even though they tested to be working. Did not fix. It ended up being the feeder control board.

Great info everyone thanks going there this morning.

[davebtech]

Great info everyone thanks going there this morning.

Thought I would let everyone know on this it was the feeder control board.

[davebtech]

[QUOTE=davebtech;638227]Thought I would let everyone know on this it was the feeder


Jam came back replaced feeder photo sensor part #pshvhpgp1a73a+-18 photo sensor ,2 number 8s in part manual it was the one closest to front of machine .