Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6
  1. #1
    Technician
    Join Date
    Feb 2013
    Location
    sheffield
    Posts
    39
    Rep Power
    23

    MX2614 E7-11 Error

    Hi just after some advice ,

    I have had 2 MX2614's in the past couple of weeks with the same error code....E7-11 ( white shading error )

    The error goes away after a reboot for maybe an hour then returns. Both machines have had the same work done on them to try to resolve but with no effect.

    Work done is

    All connections reseated , white plate cleaned and then replaced , scanner lamp replaced , scanner lamp pwb replaced (latest updated one fitted ) , mirror and lens replaced , ccd replaced and scu pwb replaced.

    Any ideas welcome..

  2. #2
    Senior Tech 250+ Posts
    Join Date
    Aug 2009
    Location
    Newry
    Posts
    262
    Rep Power
    32

    Re: MX2614 E7-11 Error

    Are they on the same site?

    Electrical noise has been known to damage boards not sure whether it would be PCU or MFP

  3. #3
    Service Manager 10,000+ Posts
    MX2614 E7-11 Error

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    22,658
    Rep Power
    658

    Re: MX2614 E7-11 Error

    Quote Originally Posted by mabro1974 View Post
    Hi just after some advice ,I have had 2 MX2614's in the past couple of weeks with the same error code....E7-11 ( white shading error )
    The error goes away after a reboot for maybe an hour then returns. Both machines have had the same work done on them to try to resolve but with no effect.
    Work done is
    All connections reseated , white plate cleaned and then replaced , scanner lamp replaced , scanner lamp pwb replaced (latest updated one fitted ) , mirror and lens replaced , ccd replaced and scu pwb replaced.
    Any ideas welcome..
    seems you went with the most expensive and time consuming repairs. KISS... what about PCU and dev units? you never mentioned PAGE COUNT on the consumables?

    always start with 1) cleaning 2) consumables 3) boards/assemblies

  4. #4
    Technician
    Join Date
    Feb 2013
    Location
    sheffield
    Posts
    39
    Rep Power
    23

    Re: MX2614 E7-11 Error

    Quote Originally Posted by Phil B. View Post
    seems you went with the most expensive and time consuming repairs. KISS... what about PCU and dev units? you never mentioned PAGE COUNT on the consumables?

    always start with 1) cleaning 2) consumables 3) boards/assemblies

    Thanks for the reply , i did clean everything 1st. Then followed instructions as per service manual. Why would dev units cause E7-11 when the fault is white shading error when the copy lamp is reading the white reference plate ??
    PCU sounds a good shout.

    Thanks

  5. #5
    The Wolf 2,500+ Posts mojorolla's Avatar
    Join Date
    Jan 2010
    Location
    Cleveland OH
    Posts
    2,512
    Rep Power
    125

    Re: MX2614 E7-11 Error

    Go into SIM 63 data display. If CCD GAIN value is double digits, CCD needs to be replaced.
    Depending on model, there is an OC and DSPF value....


    Failing to plan is planning to fail!!!

  6. #6
    Senior Tech 100+ Posts
    Join Date
    Oct 2012
    Location
    LI, NY
    Posts
    168
    Rep Power
    25

    Re: MX2614 E7-11 Error

    maybe run the shading simulation(s)...

    63 1 Used to display the shading correction result. Scanner
    2 Used to perform shading. Scanner
    3 Used to perform scanner (CCD/CIS) color balance and gamma auto adjustment. Scanner
    4 Used to display the SIT chart patch density. Scanner
    5 Used to perform the scanner (CCD/CIS) color balance and gamma default setting. Scanner

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here