Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    Service Manager 1,000+ Posts
    MX-M503N "The number of Job Log reached to the designated value" issue.

    copiertec's Avatar
    Join Date
    Jan 2016
    Location
    Centereach, L.I. New York
    Posts
    2,161
    Rep Power
    101

    MX-M503N "The number of Job Log reached to the designated value" issue.

    I am getting " the number of job log reached to the designated value" message on a MX-M503N. This is a busy mfp with several pc's printing and scanning to it, as well as, receiving and sending fax's, simultaneously, at times. Besides clearing the data with a 62-10, which I think may just be a temporary fix, as the issue may arise in the future. Would adding extra memory resolve the issue? Or are there other fixes to resolve this issue?

  2. #2
    Service Manager 1,000+ Posts bilyahn's Avatar
    Join Date
    Dec 2006
    Location
    Quincy, CA
    Posts
    1,432
    Rep Power
    54

    Re: MX-M503N "The number of Job Log reached to the designated value" issue.

    It's just an arbitrary number 60K I think for this machine. You can change the value in the web interface also can delete the job log from there as well. Won't cause any problems (normally) if you don't clear the log just get that annoying message periodically. I very rarely if ever clear this out....

    Good luck

    Bil

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here